twizzle Posted September 3, 2011 Share Posted September 3, 2011 hi all Can it be done pto mec winch on a disco 1 you see them on 110/90 but not on a disco i have the pto what is on my 2a with LT77 gearbox but would one fit to the disco and how would you fit A: the winch(H14) B:the sharfts getting around the 300tdi exhaust C:the pto anybody TWIZZLE Quote Link to comment Share on other sites More sharing options...
ajh Posted September 3, 2011 Share Posted September 3, 2011 You'll need to check to see if your transfer case has PTO splines. I've heard they were left off on some Discos but have no idea which ones. The shafts, well you'll need clearance depending on where you want to run them it probably means a plasma cutter and some fabrication. PTO hydraulic drive and H12/14 on the other hand is much easier to deal with. Quote Link to comment Share on other sites More sharing options...
steve b Posted September 3, 2011 Share Posted September 3, 2011 Dan - Dirtydiesel had one on a RRC a while back that went to Ladoga, let me see if I can find a pic.. Yep here you go iirc the RRC had an Isuzu 2.8 in cheers Steveb Quote Link to comment Share on other sites More sharing options...
Team Idris Posted September 3, 2011 Share Posted September 3, 2011 If it's going to be hard to do, I can recomend the engine driven pump up front. Better for winch-n-drive Quote Link to comment Share on other sites More sharing options...
dirtydiesel Posted September 3, 2011 Share Posted September 3, 2011 I put a h14 in my old rangy, it had a 300tdi in it on a disco r380. I clocked the pto and just had one straight shaft with a uk at each end. I had a center support bearing mounted off the bellhousing bolts. I'll see if i can find any pics. Quote Link to comment Share on other sites More sharing options...
dirtydiesel Posted September 4, 2011 Share Posted September 4, 2011 I carn't find any pics of the install, but here's a closer pic of it fitted. Quote Link to comment Share on other sites More sharing options...
twizzle Posted September 5, 2011 Author Share Posted September 5, 2011 thanks guys the reason is i have the h14 winch and the 110/90 winch bumper i either sell them or find a way to fit them to the disco Twizzle Quote Link to comment Share on other sites More sharing options...
Daan Posted September 6, 2011 Share Posted September 6, 2011 It should fit to a disco 1 transferbox, thats what I run for my PTO. There is plenty of space past a 300 tdi exhaust, but the ears that come of the mounts to fit to the gearbox might be in the way. I did away with these because I have an LT77S box. the rest can be solved with a bit of fabwork. Post a piccy when youre done. Daan Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.