mad_pete Posted November 6, 2011 Share Posted November 6, 2011 I swapped a 3.5 with a tubular manifold to a 4.2 with the range rover headers and Y piece. This was mated to the original back section but now there isn't enough movement in exhaust and the engine keeps breaking the header to Y piece connection open. My current fairly new engine mounts have already turned to mush so those need replacing. Should I look at the QT engine mounts for less movement (I don't want to be shaken to bits though) or look at redo ing the exhaust for a design that moves about more ? It's a 90. THanks Quote Link to comment Share on other sites More sharing options...
landy V8 Posted November 6, 2011 Share Posted November 6, 2011 why is the engine moving around so much. there shouldn't be all that much movement in the exhaust system anyway.the rubber drop links for the exhaust mountings should give or take up any movement. Quote Link to comment Share on other sites More sharing options...
landroversforever Posted November 6, 2011 Share Posted November 6, 2011 You haven't got confused and fitted a rattly diesel have you? What engine mounts did you use before? Quote Link to comment Share on other sites More sharing options...
mad_pete Posted November 6, 2011 Author Share Posted November 6, 2011 I've checked my mpg it's a v8 alright. Standard landrover round engine mounts. Because the range rover y piece comes to a different place the exhaust was moved to compensate and has probably lost some movement. Quote Link to comment Share on other sites More sharing options...
mad_pete Posted November 6, 2011 Author Share Posted November 6, 2011 And Nige has been at it with the mega squirt so it's probably a little more of a beast :-) Quote Link to comment Share on other sites More sharing options...
landy V8 Posted November 6, 2011 Share Posted November 6, 2011 standard V8 mounts should be fine. it shouldn't matter how you have routed your system. how far from the "y" piece is the first rubber mount.? Quote Link to comment Share on other sites More sharing options...
mad_pete Posted November 6, 2011 Author Share Posted November 6, 2011 The y piece turns up too in the middle to pick up the first so lets say it's the second mount over halfway back Quote Link to comment Share on other sites More sharing options...
mad_pete Posted November 6, 2011 Author Share Posted November 6, 2011 The range rover headers are very short so it's a twist motion the exhaust doesn't have enough give for. Quote Link to comment Share on other sites More sharing options...
Team Idris Posted November 6, 2011 Share Posted November 6, 2011 I gave up on both S1 and RRC challenge chassis. Both now have stainless flexible on them. The S1 has it from the manifold down behind the wing. The RRC has a solid exhaust clamped at the transfer box mount and is stainless flexi from there to the silencer group. If you smack the exhaust the problem is localised and isolated as well. Quote Link to comment Share on other sites More sharing options...
Team Idris Posted November 6, 2011 Share Posted November 6, 2011 And I run radious arm bush engine mounts. The trick was to let the bush tube into the engine leg to keep standard chassis mount QT ones looked like too thin on rubber? Quote Link to comment Share on other sites More sharing options...
Eightpot Posted November 6, 2011 Share Posted November 6, 2011 I bought some new mounts when I did my last engine conversion- standard round mounts. When I was road testing, I kept getting a hard judder through the steering whenever I braked, like ABS - only I haven't got ABS. After lots of head scratching, it turned out the engine was diving forward on braking, and the alternator fan was chopping in to the steering box - I bought another set of standard mounts, Britpart I think, and they were much much firmer compared to the others, problem disapeared and been fine since. Quote Link to comment Share on other sites More sharing options...
mad_pete Posted November 6, 2011 Author Share Posted November 6, 2011 I do have a flex section in now but it doesn't seem to have helped. The defender the engine came out of was using QT mounts but research suggests they can be a little firm. If people run then without problem I'm happy to go with that as my current mounts are falling apart already anyway. Maybe I have got a slack batch pair and need a bigger flex section although maybe the flex is struggling to deal with the twist. Quote Link to comment Share on other sites More sharing options...
rusty_wingnut Posted November 6, 2011 Share Posted November 6, 2011 I'm running captive QT style mounts but they're my own design and use the bigger front hockey stick bush. Vibration is good and it's less tartly than the tdi. Quote Link to comment Share on other sites More sharing options...
FridgeFreezer Posted November 7, 2011 Share Posted November 7, 2011 Standard motors don't do it with standard mounts so you need to look at what's different. The exhaust should have a mount to the transfer box, this holds it all straight relative to the engine, so perhaps the problem is that you're holding it too rigidly beyond that point. Failing that, add a flexi after that point. Quote Link to comment Share on other sites More sharing options...
Bowie69 Posted November 7, 2011 Share Posted November 7, 2011 The exhaust should have a mount to the transfer box, Hummm, the RRC doesn't have this, which is what the headers and Y are from (it has a chassis mounted errr mount ), so maybe this is the problem? Quote Link to comment Share on other sites More sharing options...
mad_pete Posted November 7, 2011 Author Share Posted November 7, 2011 That would be the difference the range rover Y piece is central where as the land rover one is more to the left to pick up the transfer box mount er mount. I am not picking that up. I do have a flex piece in but I think it is struggling to help as it's the twist that is breaking the manifold connection not forward or back. Originally I went with the range rover Y piece for the lambda sensors but now I'm squirted I have less to worry about. Quote Link to comment Share on other sites More sharing options...
Range Rover Blues Posted November 10, 2011 Share Posted November 10, 2011 I#m not sure a flexi can deal with twisting vibrations either, they are deisgned to not twist. I used to keep blowing the same gaskets on the LSE, I assumed it was the cats blocked becasue they always went when I towed something. I ended up with a sports stainless system, which cracked on number 8 last year. Quote Link to comment Share on other sites More sharing options...
mad_pete Posted November 24, 2011 Author Share Posted November 24, 2011 okay after much deliberating (and it's nearly Christmas) I'm going with http://www.ebay.co.uk/itm/Land-Rover-V8-Defender-90-Griffin-exhaust-stainless-/220556881449?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item335a36ee29 shiny I'm thinking side exit. Anybody else got one ? From what I've seen reviews are positive Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.