wailofthesnail Posted August 9, 2006 Share Posted August 9, 2006 does anyone know which terminals do what on an AMR3325 volt sensing relay? Quote Link to comment Share on other sites More sharing options...
western Posted August 9, 2006 Share Posted August 9, 2006 (edited) the 3 spades are earth,battery +ve & to rear screen heater diode, got one of those relays here, spades are marked 2,3 & 4without delving into my 110's dark areas I can't say which cable goes to which spade terminal. Edited August 9, 2006 by western Quote Link to comment Share on other sites More sharing options...
western Posted August 9, 2006 Share Posted August 9, 2006 Right been out to my 110 & had a look, with the terminals facing you number 3 is on the left, 4 in the centre & 2 on the right connected thus 3 to Brown Batt+ve 4 to Black/slate trace rear screen relay diode 2 to Black Earth/Ground. hth Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.