coppiceno1 Posted December 5, 2011 Share Posted December 5, 2011 Hi to one & all,just a little problem,on start up i can hear my fan running, i have replaced the engine temp sensor,can any out there help Quote Link to comment Share on other sites More sharing options...
fozsug Posted December 5, 2011 Share Posted December 5, 2011 Engine? Fuel? Year? All the above will help in getting a reply Quote Link to comment Share on other sites More sharing options...
coppiceno1 Posted January 19, 2012 Author Share Posted January 19, 2012 Hi.sorry for the delay,had a family problem, it's a 2.5 diesel on a 2002 Quote Link to comment Share on other sites More sharing options...
coppiceno1 Posted January 19, 2012 Author Share Posted January 19, 2012 HI,Sorry for the delay had a family problem abroad,back now ,2.5 diesel on a 2002 Quote Link to comment Share on other sites More sharing options...
teabag Posted January 20, 2012 Share Posted January 20, 2012 A known issue that requires a BCU reset (Hawkeye or similar), at sometime the A/C fan has cut in but unlike the D1 it's not self resetting. Quote Link to comment Share on other sites More sharing options...
sierrafery Posted January 22, 2012 Share Posted January 22, 2012 Hi all, as mr.Old Hand said, it's quite common ... take out it's relay(R4 engine bay fusebox) untill u get near a tester... i think u dont need cold air this time of the year , the viscous fan is enough for engine cooling(i ran a whole year without it) . If no joy with the tester we'll speak again Quote Link to comment Share on other sites More sharing options...
coppiceno1 Posted January 25, 2012 Author Share Posted January 25, 2012 Hi,thanks for the help,keep up the good work. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.