saley Posted August 20, 2006 Share Posted August 20, 2006 HELLO EVERYONE, IS EVERYBODY READY FOR THIS WEEKEND SHOULD BE WET AND MUDDY UP THERE. I'VE NEARLY DONE, JUST NEED TO GIVE THE TRAILER A LOOK OVER. SHIRLEY IS YET TO FIT NEW ENGINE, BOTH WINCHES, AND A NEW BRAKE MASTER GOT HIS WORK CUT OUT. ALAN'S IS FINISHED ISH I THINK, BELL ME ALAN IF YOU NEED A LIFT. SEE YOU UP THERE FRIDAY SOMETIME ABOUT 1.00 ISH ALL BEING WELL Quote Link to comment Share on other sites More sharing options...
D9OSV Posted August 20, 2006 Share Posted August 20, 2006 You having a laugh.... Been sweating blood.........Breaking skin........ Working night and day.... Of Course i'm NOT ready See you there....... I hope Jim Quote Link to comment Share on other sites More sharing options...
GBMUD Posted August 20, 2006 Share Posted August 20, 2006 HELLO EVERYONE,IS EVERYBODY READY FOR THIS WEEKEND SHOULD BE WET AND MUDDY UP THERE. I'VE NEARLY DONE, JUST NEED TO GIVE THE TRAILER A LOOK OVER. SHIRLEY IS YET TO FIT NEW ENGINE, BOTH WINCHES, AND A NEW BRAKE MASTER GOT HIS WORK CUT OUT. ALAN'S IS FINISHED ISH I THINK, BELL ME ALAN IF YOU NEED A LIFT. SEE YOU UP THERE FRIDAY SOMETIME ABOUT 1.00 ISH ALL BEING WELL No need to shout, we can all hear... Chris Quote Link to comment Share on other sites More sharing options...
Adrian Turner Posted August 20, 2006 Share Posted August 20, 2006 You having a laugh.... Been sweating blood.........Breaking skin........ Working night and day.... Of Course i'm NOT ready See you there....... I hope Jim Normal service then Jim Don't panic I'll pop mine over one eve for that tune up then...... what do you men this week not a good time Quote Link to comment Share on other sites More sharing options...
saley Posted August 21, 2006 Author Share Posted August 21, 2006 No need to shout, we can all hear... Chris just excited chris started packing this morning and dieseled up Quote Link to comment Share on other sites More sharing options...
GBMUD Posted August 21, 2006 Share Posted August 21, 2006 just excited chris Good for you. Hope you - and all - have a good time. I don't know how many competitors there are but it seems like most of them are LR4x4. Chris Quote Link to comment Share on other sites More sharing options...
simon_s Posted August 21, 2006 Share Posted August 21, 2006 Have fun Saley. I hope Shirley get's his sorted in time. Quote Link to comment Share on other sites More sharing options...
saley Posted August 21, 2006 Author Share Posted August 21, 2006 Have fun Saley. I hope Shirley get's his sorted in time. Hi Simon, Shirley was not a happy bunny this morning when i rang to see how he'd gone on if he dosn't get his sorted they will resort to plan B go in Glyns with Shirley bitching, will have to stock up on cv's but hopefully Shirley will fix his not much time left will let you have some pic's if we manage to take any see you at round 6 Quote Link to comment Share on other sites More sharing options...
Paul Wightman Posted August 21, 2006 Share Posted August 21, 2006 Nearly ready, still have to polish the winch motors (explanation later!) Had to do a little welding on the 3 link due to fatigue, tighten up the front callipers as they were falling off, even fitted some new pads (yes they are the right way round Jim!), can’t be ar**ed to get the mud out of the tyre beads as I have air and fitted a second pair of waffles in the back (you really need 3 pairs for Argyll but what the hell!). Quote Link to comment Share on other sites More sharing options...
D9OSV Posted August 21, 2006 Share Posted August 21, 2006 Three lots of waffles.......... It's an offroad event, Not a breakfast bar Nearly ready chief........ Ha Ha....be still my aching sides Jim Quote Link to comment Share on other sites More sharing options...
will_warne Posted August 23, 2006 Share Posted August 23, 2006 Have fun, chaps. Good luck! I'm gutted I'm not there but deffinatly next year (if I've finished the truck ) Quote Link to comment Share on other sites More sharing options...
alan kemp Posted August 23, 2006 Share Posted August 23, 2006 (edited) Crikey its wednesday night, rear winch piped up, still need to mount it, ropes to put on both winches, third link bush to do, XEng lights to wire up which will cut 200 mm of my overheight truck, brakes work, finally and it needs loading up. Edited August 24, 2006 by GBMUD Quote Link to comment Share on other sites More sharing options...
marsie Posted August 23, 2006 Share Posted August 23, 2006 Have fun, chaps. Good luck! I'm gutted I'm not there but deffinatly next year Just what i was going to say .Have a good weekend guys and lets have some good photos to look at when you get back to see what we missed Paul Quote Link to comment Share on other sites More sharing options...
saley Posted August 24, 2006 Author Share Posted August 24, 2006 (edited) Crikey its wednesday night, rear winch piped up, still need to mount it, ropes to put on both winches, third link bush to do, XEng lights to wire up which will cut 200 mm of my overheight truck, brakes work, finally and it needs loading up. Alan, shirley has admitted defeat and gone to plan B, going in Glyns motor and bitching shame he has worked like a Trojan but changing the engine,fitting 2winch mounts and winches and doing the brakes in a week just to much never mind shirley there is always next year Daffyd rang yesterday he will be at our's friday morning we are setting of at 7am meet you at services give me a ring Edited August 24, 2006 by GBMUD Quote Link to comment Share on other sites More sharing options...
alan kemp Posted August 24, 2006 Share Posted August 24, 2006 I have some welding to do today and was dredding rain as I have to work outside now I have no workshop. Woke up to BLUE sky, happy now, should be done today. John, which services, I will join M6 after M65 joins so services after Preston? I will set off at 6:30 so would hope to get there a few minutes before you. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.