Harrod Posted March 24, 2012 Share Posted March 24, 2012 hi, I've just done the wheel bearing on a disco disc break rear axle, the bearings are fine, but i've only got one seal and should have two. any idea what part numbers I need? one goes on the stub axle behind the bearings and one goes in the hub before the washer and nuts. thanks! Quote Link to comment Share on other sites More sharing options...
western Posted March 24, 2012 Share Posted March 24, 2012 you might have this type of rear axle http://www.numcat.ru...ver/p/32/45231/ which only has a inner seal item 11 it maybe possible to fit the outer seal item 15 FRC8222 as on this page http://www.numcat.ru...ver/p/32/45232/ Quote Link to comment Share on other sites More sharing options...
Harrod Posted March 24, 2012 Author Share Posted March 24, 2012 I think I must have bought the single seal kit then. it had two when I took it apart and the seal didn't look particularly like either of the existing ones. ill try the other seal aswell. thanks for your help. Quote Link to comment Share on other sites More sharing options...
western Posted March 24, 2012 Share Posted March 24, 2012 happy to help, hope you can get the correct bits & get the job done. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.