mcc1979ian Posted July 8, 2012 Share Posted July 8, 2012 ok so on its way is the 4.6 gems engine so now i need to get all the other bits im gona need 1st off is the fuel pump, if using my side mounted tank will any of these be suitable? http://www.ebay.co.uk/itm/330741950913?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649 http://www.ebay.co.uk/itm/230758063956?ssPageName=STRK:MESINDXX:IT&_trksid=p3984.m1436.l2649 http://www.ebay.co.uk/itm/110872445330?ssPageName=STRK:MESINDXX:IT&_trksid=p3984.m1436.l2649 Quote Link to comment Share on other sites More sharing options...
Quagmire Posted July 9, 2012 Share Posted July 9, 2012 I have a prc8318 in my side tank. Its a two hole tank. Pump has been extended to reach bottom of tank as in standard form is too short. Not hard to do, just add a piece of steel in and a longer section of hose. I have pics somewhere but am at work (full internet lock down). Will post one up later... someone will probably beat be to it though! Quote Link to comment Share on other sites More sharing options...
Hybrid_From_Hell Posted July 9, 2012 Share Posted July 9, 2012 Wot Mr Quag says Route you do depends on the tank type / unit you have shove a piccie up or describe Nige Quote Link to comment Share on other sites More sharing options...
mcc1979ian Posted July 9, 2012 Author Share Posted July 9, 2012 currently not got a tank as the old one was past it, so will buy either 1 or 2 hole dependent on whats required Quote Link to comment Share on other sites More sharing options...
Quagmire Posted July 9, 2012 Share Posted July 9, 2012 Here we go- the extended pump: The extra bit of steel was from an old drawer runner... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.