Big.Mike Posted September 8, 2012 Share Posted September 8, 2012 My two repeaters on the wings don't seem to be working, I have changed the bulbs, are they one their own fuse? Thanks, MIke Quote Link to comment Share on other sites More sharing options...
vulcan bomber Posted September 8, 2012 Share Posted September 8, 2012 No there both on the same fuse and so is the rear bulb... More likely theres a break in the supply to the bulbs or the earth... Your issue is almost certainly in the wing wiring. Quote Link to comment Share on other sites More sharing options...
Jode Posted September 8, 2012 Share Posted September 8, 2012 As the Bomber noted, check your earths. They often corrode and prevent current flow, resulting in 'look, ma, no lights'! Quote Link to comment Share on other sites More sharing options...
steve200TDi Posted September 8, 2012 Share Posted September 8, 2012 Yep, probably a dodgy corroded connection. I had this last week. After playing with the wirings and moving them around they suddenly started working again. The fix was to cut out the 'factory' bullitt connectors and add in some new electrical bullitt connectors, all fine now. Steve Quote Link to comment Share on other sites More sharing options...
Big.Mike Posted September 8, 2012 Author Share Posted September 8, 2012 Just waggled the bulbs, the metal is corroded in the connectors, whats easiest to do, clean them (and how) or buy a new one? Cheers, Mike Quote Link to comment Share on other sites More sharing options...
western Posted September 8, 2012 Share Posted September 8, 2012 might be better in the long term to replace them. always some on ebay. Quote Link to comment Share on other sites More sharing options...
Big.Mike Posted September 8, 2012 Author Share Posted September 8, 2012 I'll get some new ones, any advice on which ones to get? Quote Link to comment Share on other sites More sharing options...
western Posted September 8, 2012 Share Posted September 8, 2012 IIRC you should have the square style repeaters thiese http://www.lrseries....repeater&page=1 Quote Link to comment Share on other sites More sharing options...
Big.Mike Posted September 9, 2012 Author Share Posted September 9, 2012 IIRC you should have the square style repeaters thiese http://www.lrseries....repeater&page=1 Yep, these are the ones, do you know if this comes with the bulb connectors? The bulb pushes into the end of the loom. I'll try to post a picture. Cheers, Mike Quote Link to comment Share on other sites More sharing options...
western Posted September 9, 2012 Share Posted September 9, 2012 I think this is the wiring for the square repeaters http://www.lrseries.com/shop/product/listing/12753/STC966-KIT-SIDE-REPEATER-HARNESS.html?search=repeater%20&page=1 worth dropping a e.mail to them before buying Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.