ajh Posted October 29, 2012 Share Posted October 29, 2012 Need to replace a (non-existent) tube just for the master cylinder end of a D1 200TDI clutch. The ones I've been able to find locally that look correct do not fit (and I'm not pulling that master out again). Anyone know the part number for replacement tube nut? Quote Link to comment Share on other sites More sharing options...
western Posted October 29, 2012 Share Posted October 29, 2012 Discovery 1 clutch hydraulics in http://www.numcat.ru/landrover/p/32/45862/ pipe item 6 is from clutch master cylinder to damper/slave cylinder [you can dispose of the damper unit] the end fitting to master cylinder is not listed seperately. Quote Link to comment Share on other sites More sharing options...
ajh Posted October 29, 2012 Author Share Posted October 29, 2012 In that case, do you know what size of tube nut it is? There's a hydraulics place in town here I can get most sizes from but I really don't want to remove the master again. Quote Link to comment Share on other sites More sharing options...
western Posted October 30, 2012 Share Posted October 30, 2012 Sory, I don't know what the thread size/type is, most likely metric though Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.