Scotts90 Posted November 25, 2014 Share Posted November 25, 2014 I re trimmed an old set of seats and fitted the OE heater pads...one lasted approximately 15mins before the limit stat broke. Doing the first seat is the hardest, especially clipping the seat back cover together. It's one of those jobs where a third hand would be ideal. I bought the exmoor G4 retrim kit, full set of foams/glue etc and watched the how to videos about 10 times first! Quote Link to comment Share on other sites More sharing options...
Southan268 Posted January 1, 2015 Share Posted January 1, 2015 Evening All, I am after some advice for wiring up the MagicComfort MSH60 harness. Can someone please clear up a confusion, I have with the wiring of the red and orange cables. In the book it states - 30 (Red) (direct supply from Positive battery Terminal) - 15 (Orange) (connected positive terminal, behind the battery) I read this as they are both connected to the same positive cable, but connected at different points along the cable. I believe I am miss reading this. Please can someone clarify my confusion. Additionally, I am thinking of installation a leisure battery, with a ACR and spare fuse box. Would this make life easier to connect? If so, does anyone have any wiring diagrams with the MSH60 connectivity? Cheers Stu Quote Link to comment Share on other sites More sharing options...
Anderzander Posted January 3, 2015 Share Posted January 3, 2015 Any feedback on how those Britpart retrim kits have stood the test of time ? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.