Adam001 Posted January 15, 2013 Share Posted January 15, 2013 Hi, Nearly finished with my restoration but the oil cooler pipes are bothering me. I have a 200tdi Discovery Engine with the 19J 2.5TD cooler pipes and the Disco radiator. They worked ok in the standard converted positions but now I have tilted the radiator they are no longer that tidy so thinking of swapping to braided hoses and fabbing some up to suit. So question is does anyone have any idea what the threads are on the 200tdi, engine side and radiator side. ideally knowing what threads are on the 19J lines would be the easiest as I know there are 2 types of adapter for the radiator side depending on age etc. Any thoughts? Cheers, Adam Quote Link to comment Share on other sites More sharing options...
Phil Hancock Posted January 15, 2013 Share Posted January 15, 2013 The 19J should be 1/2"BSP and the Tdi a 20mm thread as 20mm conduit blanking plug fits apparently. Quote Link to comment Share on other sites More sharing options...
Adam001 Posted January 16, 2013 Author Share Posted January 16, 2013 Cheers Phil, I'll order a cheap 1/2" BSP and 20mm adapter off ebay and use those to check Quote Link to comment Share on other sites More sharing options...
Adam001 Posted January 26, 2013 Author Share Posted January 26, 2013 Confirmed... the 19J is 1/2BSP at both ends. Going to order up some AN10 fittings and convert it all Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.