mcc1979ian Posted July 26, 2015 Share Posted July 26, 2015 ok so last week I swapped my 1.2 lt230 for a 1.6 lt230 and went to refit the 1.6 today. Problem is the upper bolt near the diff lever and the very top bolt at the rear of the box no longer tighten. Anyone any idea what bolts I require? Cheers Quote Link to comment Share on other sites More sharing options...
dangerous doug Posted July 26, 2015 Share Posted July 26, 2015 iirc not all the bolts used are the same length, you may have put a few bolts in the wrong place. If not, the threads may be FUBAR. Quote Link to comment Share on other sites More sharing options...
discomikey Posted July 26, 2015 Share Posted July 26, 2015 Also be careful as the 2 bolts that thread into the transfer box from the gearbox side need to be shorter than the rest, otherwise they will do up fine but will be touching gears inside and create swarfy mess Quote Link to comment Share on other sites More sharing options...
western Posted July 26, 2015 Share Posted July 26, 2015 should be able to work out which bolts fit in which holes from this http://lrcat.com/#31/4/53755 Quote Link to comment Share on other sites More sharing options...
mcc1979ian Posted July 27, 2015 Author Share Posted July 27, 2015 Cheers Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.