sweeney110 Posted December 18, 2015 Share Posted December 18, 2015 Hello all This may not be the right place for this question but not sure where else to put it. I almost lost a wheel last week and in doing so I've damaged the captive studs on one of my 30mm wheel spacers. Anyone any idea where I might be able to get some new ones? They tapped out easily enough. Can't seem to find a good source for them Thanks in advance Connor Quote Link to comment Share on other sites More sharing options...
western Posted December 18, 2015 Share Posted December 18, 2015 Did you buy the spacers or were they already fitted ? is there a makers or suppliers name on them ? supplier would be my 1st call if the spacers are marked. Quote Link to comment Share on other sites More sharing options...
sweeney110 Posted December 19, 2015 Author Share Posted December 19, 2015 Hell western. Thanks for the response. I did buy them but they were second hand from ebay. The stud says u176 on the head Quote Link to comment Share on other sites More sharing options...
missingsid Posted December 19, 2015 Share Posted December 19, 2015 If they are removable have you compared them against std LR studs? In therory you are just spacing the wheel out by the aluminium bit the studs should be identical to the oem ones? I have no evperience of this but can't see why you would design and make your own if they could use std. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.