JeffR Posted January 8, 2016 Share Posted January 8, 2016 OK here we go (again) so the 1993 200Ti family hack decided that functioning headlamps were not to be. Thought it was the switch, so swapped it out for a new one - epic fail. Still got no dip or full beam. I can flash full beam and have side lights. Fuses and bulbs are fine, therefore has to be wiring - does not appear to be any power to the switch or fuse board, now completely stumped . Has anyone got a clue where to look Quote Link to comment Share on other sites More sharing options...
miketomcat Posted January 8, 2016 Share Posted January 8, 2016 Just replied in your other thread have you checked the dim dip unit I seem to recall a similar problem on mine that turned out to be dim dip I bypassed mine. Mike Quote Link to comment Share on other sites More sharing options...
Nigelw Posted January 8, 2016 Share Posted January 8, 2016 93MY had horrid fuzzy links in the inner wings, you still got them Jeff? Seem to think they were a problem for a friend with lighting issues a while back. Also as per Mike, try dim dip unit. Quote Link to comment Share on other sites More sharing options...
JeffR Posted January 8, 2016 Author Share Posted January 8, 2016 Beat the bar steward! Combination of dodgy earth (there's a surprise) on nearside headlamp, chaffed wire going into fuse box and cattle trucked dim dip (same unit as my V8 Defender - now there's a stroke of luck). Darkness helps when looking for chaffed wires.......sparks are very pretty. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.