oppositelock Posted April 24, 2016 Share Posted April 24, 2016 I'm rebuilding a Defender 200tdi bought as an unfinished project. I can't see what holds the speedo cable into the drive fitting on the transfer box. The square cable end goes into the hollow square drive OK, but there's nothing to hold it in. Should there be some sort of a clip to hold the flange on the cable outer to the gearbox? Any ideas please. John Quote Link to comment Share on other sites More sharing options...
western Posted April 24, 2016 Share Posted April 24, 2016 there should be a stud/nut items 14 15, 16 in http://www.allbrit.de/UNI.cfm?PAGE=753274&SPRACHE=EN to secure a U shaped flat clip to hold the cable end in place. U clip is item 20 in http://www.allbrit.de/UNI.cfm?PAGE=753987&SPRACHE=EN Quote Link to comment Share on other sites More sharing options...
oppositelock Posted April 25, 2016 Author Share Posted April 25, 2016 Thanks Ralph, I know now what to do, I'll go to my friendly local LR parts shop and get a clip. Regards John Quote Link to comment Share on other sites More sharing options...
western Posted April 25, 2016 Share Posted April 25, 2016 your welcome Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.