dailysleaze Posted May 22, 2016 Share Posted May 22, 2016 Whilst taking the injection pump top housing off to do the throttle spindle seal, I snapped an ear off of the throttle springy thing. Turns out the EGR type pump has lots of extra levers in it which prevented the cover coming off easily like every guide on the internet says it does. I don't know where the piece is, so it may be in the bottom of the pump. I rooted around inside with a magnetic screwdriver but didn't find it. I could probably replace the broken part, but I suspect it's likely that the missing piece would destroy the pump anyway. Thoughts? Quote Link to comment Share on other sites More sharing options...
pat_pending Posted May 22, 2016 Share Posted May 22, 2016 Looks like some sort of alloy, so not magnetic. Best keep looking. Quote Link to comment Share on other sites More sharing options...
dailysleaze Posted June 20, 2016 Author Share Posted June 20, 2016 So to close this off after a month of finding time to get the pump off and seek out the right part, I had to buy the full spring assembly @ £75. Part number is 1 463 163 150. I took the opportunity to replace all the seals on the pump at the same time and shook it upside down a lot. Nothing fell out so i'm fairly confident about it not being in there. I tried to take the distributor head off to really check inside, but one of the torx screws was rounding so left it alone. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.