BrettS Posted June 27, 2016 Share Posted June 27, 2016 Got the rest of the bits figured out but can anyone tell me just exactly where this bracket is supposed to mount? I'm thinking on the side of the bulkhead toe box facing forward to support the elbow? Thanks Brett Quote Link to comment Share on other sites More sharing options...
Mo Murphy Posted June 27, 2016 Share Posted June 27, 2016 It goes on the inner wing to support the flexi hose. HTH Mo Quote Link to comment Share on other sites More sharing options...
western Posted June 27, 2016 Share Posted June 27, 2016 fits on the inner wing to support the big air hose from wing side intake, Quote Link to comment Share on other sites More sharing options...
BrettS Posted June 28, 2016 Author Share Posted June 28, 2016 Thanks guys. My 110 was not originally a Tdi, so wasn't sure on the set up. I don't see how the bracket could naturally be mounted to the inner wing on mine to orientate it to support the hose. Must be a mounting tab or something I am missing. Easy enough to make something up Brett Quote Link to comment Share on other sites More sharing options...
Maverik Posted June 28, 2016 Share Posted June 28, 2016 it acts as a hook i.e. mounted vertically and just keeps the air box to air scoop hose from flapping about... http://img.photobucket.com/albums/v384/western214h/Defender%20200Tdi%20engine%20bay/IMG_0857.jpg In the picture the bracket is located under the washer bottle area of the wing and just keeps the intake hose against the inner wheel arch. Quote Link to comment Share on other sites More sharing options...
Mo Murphy Posted June 28, 2016 Share Posted June 28, 2016 This is mine ... Mo Quote Link to comment Share on other sites More sharing options...
western Posted June 28, 2016 Share Posted June 28, 2016 it acts as a hook i.e. mounted vertically and just keeps the air box to air scoop hose from flapping about... http://img.photobucket.com/albums/v384/western214h/Defender%20200Tdi%20engine%20bay/IMG_0857.jpg In the picture the bracket is located under the washer bottle area of the wing and just keeps the intake hose against the inner wheel arch. that's my 110's engine bay I think the OP has a 300tdi, as that's what the parts diagram shows. Quote Link to comment Share on other sites More sharing options...
western Posted June 28, 2016 Share Posted June 28, 2016 Thanks guys. My 110 was not originally a Tdi, so wasn't sure on the set up. I don't see how the bracket could naturally be mounted to the inner wing on mine to orientate it to support the hose. Must be a mounting tab or something I am missing. Easy enough to make something up Brett I'm assuming you have a 300tdi ? as the parts diagram is the 300tdi air intake vent. Quote Link to comment Share on other sites More sharing options...
BrettS Posted June 28, 2016 Author Share Posted June 28, 2016 Yes, 300Tdi. 110 is an Ex-Mod so originally had the 2.5NA. I upgraded a few years ago. It didn't have the proper wing with the air inlet so the hose has been tied up in the engine bay all this time. All sorted now with the proper bits, just a bit confused about that bracket. Think I have that licked now too but it has decided to start pouring rain so will have to finish up later. Thank you all for the help. Brett Quote Link to comment Share on other sites More sharing options...
neil110 Posted June 29, 2016 Share Posted June 29, 2016 From memory and this a sepia toned memory so please forgive any errors. On a 300 there is a short flexi hose to the water drain valve thingy. The clip shown in the diagram bolts to a small bracket on the chassis and it supports the drain valve assembly. Item 10 in the link http://numcat.ru/landrover/p/31/53450/ Quote Link to comment Share on other sites More sharing options...
Maverik Posted June 29, 2016 Share Posted June 29, 2016 Ooops, I was thinking 200tdi... sorry for confusion. its pretty much does the same thing mind, just on the other side... Quote Link to comment Share on other sites More sharing options...
BrettS Posted July 1, 2016 Author Share Posted July 1, 2016 From memory and this a sepia toned memory so please forgive any errors. On a 300 there is a short flexi hose to the water drain valve thingy. The clip shown in the diagram bolts to a small bracket on the chassis and it supports the drain valve assembly. Item 10 in the link http://numcat.ru/landrover/p/31/53450/ OK, this makes sense too. With my 110 not originally being a 300Tdi though, I could not find a small bracket on the chassis so I bolted the hose clip to the chassis where the inner wing attaches. This actually works well as it helps to hold the air hose off the brake line junction/valve thingy (LHD truck) which is mounted right there on the bulkhead. Brett Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.