connorstewart
-
Posts
19 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by connorstewart
-
-
Thought i would let anyone with the same problem know what the problem was,
I purchased a 801 controller and it returned no errors, so i tried bypassing the circuit breaker with a fussed wire (30 amp) and hey presto the heater is working :).
so only problem now is finding a similar circuit breaker because they are going for 150 quid each online :s
Should be something similar about though.
-
-
sure, just sent to your fb account
the dimensions are only rough for the back, scaled up from a pdf using a ruler and the chassis and cab is downloaded, but good for guesstimates.
Cheers
-
- Popular Post
- Popular Post
-
Thanks guys!
No blink codes at all, i hear a change in fan speed when i reset but thats all.
I am near Belfast so not to close to Hants or Dorset, but if you know of anyone that could help in N.Ireland that would be great thanks! If not will have to be a 801 I guess.
-
Hi thanks for the help. Just purchesed a 98 pulse ambulance.
I have tried the above with no luck with the d5 in my pulse ambulance, my heater starts up and will run continuously when the dial is turned to the blue spot, however when turned to the red section of the dial the heater blows for 20 seconds and then trips out, ie causes the switch to jump to the out / off position.
The heater was tried to be started more times than 4 so has probably been locked out and this may have been due to low fuel as only had 1/8 th of a tank but upon refilling and trying the above mentioned trick no luck!
Any suggestions would be great!
Cheers
Wolf Ambulance
in Military Forum
Posted
Updates on the interior if anyone is interested.