[Newbie here, wondering where the best place is to get doors?]

Hmmm my original skins aren't too bad, bit of bubbling at the bottom but nothing major. Might be worthwhile just trying to find replacement frames?

[Newbie here, wondering where the best place is to get doors?]

9 hours ago, dave88sw said:

If you find some good quality ones let us know where from 😂.

I've fitted britpart ones and sp land rover ones. The britpart ones are sort of ok, they're not great quality, the steel frame is thin and the section of frame where the door is curved is pressed badly, it looks a bit crushed there, it's also 5mm shorter than an original door, which doesn't sound a lot but it looks a lot, because the gap at the front between the bulkhead and door is half the size of the one at the back between the door and tub. The SP land rover ones were a little better made, frame was stiffer and they're the right length but the curve of the door was far too flat, it doesn't match up with the tub at all which meant that it never looked right, regardless of how you adjust it, it you adjusted it so the capping lined up, it looked far too low on the curve, if you adjusted it so the curve lined up, it looked too high on the capping and the door gaps weren't parallel.

I don't know of any with galvanised frames other than SP Land rovers seem to have that option, although i've not used them, the ones i fitted were plain mild steel.

Hmmm, neither of those sound great to be honest.... But think the sp ones would annoy me the least  😂

7 hours ago, David Sparkes said:

I don't know if you can follow this link, access might depend on registering for the Forum, or worst case, joining the Club.

If you can access the Search results this is the link.

Ahh, tested and found it took me to the initial Search page, not the search results page.
I searched for 'Paintman doors', specifying 'Show results as messages' in all forums.

Regards.

Had a look there, so paintman one possibly not great either?

Anyone any experience with these? https://www.lrparts.net/395533galv-land-rover-series-3-galvanised-right-hand-door-bottom-anti-burst-style-with-key-hole-galvanised-frame-with-alloy-skin.html

 

[Newbie here, wondering where the best place is to get doors?]

Sorry yes, I was perhaps a bit vague.

Well my door tops are completely gone so definitely need new ones of those, which I think come galvanised?
 And yes I was thinking galvanised frames for the door bottoms which are also in pretty bad nick.

Hadn't actually heard of bits4landys, so are those two companies recommended? Or are most of the companies making doors pretty good? google throws up plenty of options....

 

[Newbie here, wondering where the best place is to get doors?]

Hi guys, so yeah as per title I've just bought a series 3 that needs new doors in the worst way.

I see loads of different suppliers but is there any particular company I should be using in regards to quality? I'd prefer galvanised ones if possible.