[2a headlight fittings]

On 4/4/2020 at 9:39 AM, Anderzander said:

I like Steve B’s idea 💡 

The one in the picture has no bowl, but I would think if you bought the generic bowl type (along with a couple of halogen lights) then you would be able to make something work.

it looks as simple as your grill panel having integrated front rims, behind that you would think you’d have a number of options for fitting it in and adjusting it.

I have the same problem - I spoke to a member of the GRTC at Goodwood.  Looking at his there is no bowl because LR decided to put a battery where the bowl should be.  Normally, adjustment is carried out by fixing the bowl behind the fixing ring and then moving the fixing ring to adjust the headlight (teaching Grandmothers here) on the non chrome bezel the front panel is fixed and the bowl is moved.  I ordered and returned a fixing kit because the headlight clamp ring wouldn't go over the headlamp and the ring was a few mm to small to line up with the holes in the front panel.  2BA screws shouldn't be a problem, I'll make some.  Its the ring I'm after. Any ideas?