-
Posts
12 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by TOM TOM GO
-
-
I'd be inclined to think that trying to waterproof one will inevitably hold muck in rather than keep it out - this would lead to faster corrosion.
I would clean it all up, but don't use any lube in putting it together - grease tends to hold onto muck which then turns into a paste.
thanks for advice. i have cleaned it all up. you think you could get a rubber cover to go over the wires to keep them dry.
-
hi everyone. been working on my 90 starter moter was dead. had a job to clean all the wires full of carp and oil. put once i cleaned it all up working ok now. but was thinking has any the members got any tips to seal the wires up with something to keep it dry and clean . i thort of a rubber boot of some sort to go over all the wires and seal them in keeping the muck out. has anyone else know of something that would work.
-
I was given one of these
http://www.ringautomotive.co.uk/product_detail.asp?prod=1957
really good. has a multiposition stand/hook and a couple of those really strong small magnets on the back. Is rechargeable too
i found out of a mate if you are using the standard work lamp just change the bulb for a energy saving one. i find you dont get the heat in your face and if you drop it when working it pretty tuff. cost you 99p.
-
Roof join to body sides, front door seals, rear door seal, body joint from sides to tub.
i had the same problem .found out it was a gromit missing on the brake wire .when all the carp flys up off the rear wheels. it might be that worth a look mate.
-
Except with those, you will have to spend a bunch of time making up a mounting system. The Mondeo fan goes straight in.
im working on my 90 . do the army landys have electric fans on thers.
waterproof starter motor
in Tools and Fabrication
Posted
hi just keep it clean as part of my sevice. been working great now. thanks