tobmo
-
Posts
17 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by tobmo
-
-
Hello again my td4 sport 2004 has just started to throw out white fumes every time I start it hot or cold any ideas
-
vin no FAE74A292547
-
just replaced the vacuum pump no change could it be the servo ?
-
Hi does anybody have the part number for a td4 sport brake servo
-
Download Microcat from Here
Thanks Western have downloaded it but cant get it to work on windows vista
-
Where can I get a parts manual for my td4
-
Sorry
-
Thanks very much
-
Hello has anybody got the part numbers for the vacuum pump and o ring for my td4 2004 sport please
-
Hello again no brakes on my td4 sport as nif the servo is not working rac guy reconds it could be the servo pump any ideas anyone ?
does anybody have the part number for the vacuum pump for my td4 2004 sport
-
Hello again no brakes on my td4 sport as nif the servo is not working rac guy reconds it could be the servo pump any ideas anyone ?
-
Give etyres a go just got 2 tyres for my td4 sport £374 bargain and they fit them on your drive way
-
Hello again have just done a service on my td 4 and have developed a noise when pulling off from a stand still for a few seconds sounds like a quiet horn checked all the hoses nothing loose or worn I have also changed the crank case filter any ideas ?
-
I had the car on front ramps and checked where the oils sump plug was. Then I carefully measured where I would need the hole cut!!
P.S Ive owned my Freelander from new and I couldnt get all the nuts off to take of the tray hence the reason I bored out a hole. Whilst doing this I noticed that there was oil stained on the tray and even my land rover dealer had just been removing enough bolts needed to get to the sump plug and therefore some oil had leaked out onto the tray which they just wiped clean. Therefore I wouldnt worry if you get a few drops falling on the tray when you have bored out the hole as you can easily clean it with a paper towel. Just take your time when drilling it. I did mine 2 years ago when I started to service the Freebie myself and now the oil change is much quicker as it should be.
Hope that helps you?
Thanks will have a go tomorrow will let you know how I get on
-
I used a 4" cutter and bored the hole. Never given me any problems, saves you time when flusing the oil every year!!
where about did you drill the hole rough dimensions my black & decker is at the ready !
-
Hope someone can help need to do an oil change on my 2004 freelander td4 but cant get the belly panel off( bolts siezed solid ! ) to get at the sump plug doesa any body have the dimentions for cutting a hole in the panel to get at the sump plug ?
engine management light
in Freelander Forum
Posted
Hello again the engine management light on my td4 sport comes on every now and then no loss in power and everything seems to wok fine any ideas