Garymv
-
Posts
38 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by Garymv
-
-
Ive just noticed the comments , I'm still here to help with any issues.
cheers
Gary
- 2
-
hi there
can you send me part number details along with application and I'll try to help.
cheers
Gary
-
give me the part numbers and I'll try to help with info on the manufacturers.
cheers
Gary
-
hi just popped in and noticed this.
how can i help?
-
give me the part number and I'll tell you were they come from
cheers
Gary
-
Ive just noticed this statement........
"If any part is found to be defective following an inspection by our quality team due to faulty materials or workmanship then that part will be replaced free of charge."
"quality team" ..........."faulty materials"............"workmanship"
You aint geeting your replacement part are you!
-
I was simply informing members of the results of a test on my own vehicle.
I do not want anyone to buy a Unichip box...........I really couldnt care less in fact.
In future I will run my posts through mods in case these things are misinterpreted.
If you dont like these type of things may I suggest you dont look at them to avoid upsetting yourself.
cheers
Gary
-
Just to add
the LLJ500010 is around £20 from LR
But a cheapy replacement is about £8 - £10 depending on where you go .
-
Hi all
If you order 8510298 from your LR stockist you will receive the housing and filter.
If you order LLJ500010 you will get just the filter which in most cases helps most problems.
this also fits the TD6 Range Rover engine as the TD4 and TD6 are the same engines apart from the obvious 2 cylinders.
cheers
Gary
-
Hi all
Ive recently fitted a UNICHIP box to my Range and recorded the runs and figures.
here is a link.
I was around 26-28 MPG and quite sluggish before , now its around 32 - 34 mpg and more eager with better fuel consumption .
Coupled with a green air filter the results are excellent.
cheers
Gary
-
I can't begin to imagine ***tpart's response to that invitation!
I think the various companies represented on here get quite enough advertising, for free, with the blessing of the rest of the membership
No problem if companies and traders want to offer discounts to their friends from the forum (you could view it as pay-back for the help and encouragement we give ) but I'm with the concensus - we are beholden to no-one and that means freedom to get on with being the No.1 friendly and balanced source of LR related wisdom (other makes of 4x4 are available) on the web.
</twopenneth>
Just to clarify I was only kidding!
But the offer is still open for any help with parts, where they come from etc.
cheers
Gary
-
I've just fitted a paddocks re-con box this morning, only to find out that fluid is pissing out of the lower seal So it's going back on Monday
what part number they give you?
-
This was a boxed "wheel bearing" kit. - so it was pre-made up of components. Not a fan of no name parts, but the bearings don't look to bad. as they're easy enough to change I'll probably fit them up and see how I get on. I've ordered some branded Timkin bearings to keep as spares.
hi there , whats the BM number and I'll find out whats in it for you
cheers
Gary
-
Check the injector harness. I know TD5's have issues here and they need replacing periodically. However, I don't know if the symptoms you are experiencing are consistant with an injector harness fault.
its an AMR6103 ...........Actually made in Stoke on Trent.
-
Id try the regulator personally..........the loom to the ECU is OK isnt it?
-
britpart supply decent swivel housing grease....which now come with little tubes to insert into swivel housing- a marked improvement! cant think of anything else mind!
HAHAHAHAHA........I developed that for them about 8 or 9 years ago.........At Allmakes we now but it from the same place as Land Rover ........
-
I'll give de Carbons the big thumbs up.
Pro-comp and Monroes get the thumbs down. The Pro-comps didn't last long before going very soft. The Monroes were far too soft to begin with.
While at Billing lat weekend I heard a vicious rumour that Terrafirma shocks are in fact repainted Britpart stuff Can anyone substantiate this?
I can tell you 100% that our shock absorbers are not from Britpart.........As for the silver springs , I buy these myself and personally developed them with the supplier.
hope this helps.
-
i had some decarbons on a scrapiron kit i bought and, without much point of reference, found them to be good. they never got any abuse, so i suppose they would be. ome's are, of course, the cat's t****, buti don't think they'll be within budget. maybe go black and orange then, they'll match my chainsaw trousers.....
We're not having any issues with the Terrafirma +2's here at Allmakes.............maybe a cheaper option
-
Haha - no way (nice try though)
Les.
YA GOTTA TRY!!
-
354 is ivory white used on defender
-
i could ask the question but block orders would have to be done because of the logistics in the warehouse..............oh and an advert being added to the site
-
I have to agree.
Having seen quality of parts regularly discussed, I go to the Land Rover parts counter at my local dealer for most things.
Yes, it may cost more. But it'll fit and do the job. Which means a whole lot less time messing about, which is also time and money wasted in the long run. And that's without the frustration of being sold utter cr*p which would spoil my enjoyment of the vehicle.
Oh, and welcome to the forum Gary.
I admire you for registering here and asking for feedback. More companies should do the same.
Hiya Top
thanks for the welcome.
any help you might need with "dubious" parts give me a shout and Ill help were I can
cheers
Gary
-
I will be there representing the Allmakes purchasing team at the Allmakes village on Friday.
We will have Ranulph Fiennes on our stand so come and say hello.
cheers
Gary
-
Delphi are OE on this , this may help, if you need anymore info give me a shout.
cheers
Gary
You also have to remember that LR are now constantly resourcing and have an Aftermarket purchasing team. They will bwe buying as cheap as possible and given the fact that they have zero stocks on around 40,000 parts , yes 40,000!
They will be buying from any source they can to satisfy demand from dealers.
Gary
LR Part numbers
in Requests for Part Numbers
Posted
Good Morning
If I can help with your enquiries dont hesitate to ask.
www.lrparts.net