tolley
-
Posts
25 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by tolley
-
-
what should the oil pressure be at tick over with the 3.5 v8 and say 3000rpm.
-
ANYONE GOT A COLOUR WIRING DIAGRAM ,(FOUND A DEFENDER IF ITS THE SAME ) I HAVE THE RAVE CD ,BUT CAN'T FIND WIRING
-
I has similar on mine , fitted new glow plugs help it a lot .
-
well not sure what happen last night ,because went out to
first pic green plug ,top left green into black and green /white .
below that green /white spliced into black
Grey plug , yellow into blue /red.
their is another thin yellow which comes from behind side foot well cover goes into grey/yellow 4th pic
-
ok , don't mine not having the alarm , immobiliser , central locking .
is it the fix bridging 2 wire and removing the green box ?
-
4 hours ago, BogMonster said:
You need to unlock with the fob on that age of vehicle, that or the EKA code are the only way to disarm the alarm. You cannot do so just by opening it with the key, even if you locked it with the key you must use the fob to open it.
since ive had it I only use the key lock and unlock ,no alarm goes off , after using the fob today ,it now will not lock without the alarm going off when opened . . is their any way to remove the alarm completely ,as I don't want it .?
-
ANY ONE GOT A WIRING DIAGRAM , also alarm is working ,first time I use the key fob ,now every time the door with the just the key the the thing goes off , any idea how I stop it .
-
central locking works , remote works ,will have a look later at the rest , any thing I can do to sort it out please advise .
hate to think what else I might find
thanks for replying Bogmaster
-
can anyone tell what these wire might be for , got the disco a few weeks back and found some diy wiring .
seems to be coming from the green box passenger side , yellow wire has been joined to the blue /brown and just behind that yellow joined to grey
and then above black to green/white and black/white will have to check colours .
-
the head Is off now , and their are score marks in a few places good old martin Rawlinson
-
Got my recon from Mr Rawlinson 4000 miles (if that), later the heads gone .
goes into strip down this week and see what else is wrong , already got a good list so far .
-
-
did you get the turbo ?
-
rovernutzz
did you get any contact with martin Rawlinson .
-
do you know any where else that might sell them ?
-
hi all I fitted my ETG ,but its reading all over the place starts off 3000+ then goes to HH , then minus what ever ,any ideas anyone ?
-
I am thinking of doing mine in the next few days ,still not sure about leaving the manifold in place .
-
could you not start the engine then drill the hole
-
does not look good cwazywabbit ,I was just about to order one till I read this .
anyone contacted the makers
-
did this , but the gauge is reading in the - not +
-
is the banjo bolt . err886 ?
-
any recommendation on gauges .
-
great write up , will be doing this as soon as I can get the parts
-
what the scrap cat worth off a 300tdi defender.
v8 difference
in Range Rover Forum
Posted
what is the difference between the 1970 3.5 v8 and the SD1 v8 , are they a direct replacement for both .