[426 Kph!!!]

I've been playing with my new Nanocom so now I've got a whole load of faults to worry about that I never had before. But none has returned since being cleared which has left me bothered by a 'non-fault'. According to the ABS ECU the left hand rear wheel says I'm doing 426 and a bit Kph even when I'm standing still when the others say 1.7 Kph which I assume to be minimum speed that that ABS will work at (else you'd never be able to stop). The Nanocom isn't showing any faults (!) and everything seems to work as it should (obviously it is a little difficult to provoke a locked rear left hand wheel to see but a big stand on the brakes on a wet road pulls up straight with ABS working).

I've had the sensor out and all seems fine. And I've separated the plugs to the main wiring loom and WD40'd them but no change so far. Any thoughts? When I've a bit more time I'll swap the plugs round to see if the right rear starts reading fast which will narrow things and I can bung a meter on them both to see if they are different.

Hi GL88,

I have the same fault. When the car standing still Nanocom said "Rear Left Wheel Speed 4xx rpm". TC light is on all the time but the ABS is working fine (I can test it very good at the moment because we have some snow). When the weather is better I will check the sensor. Hope that he is not buggered.

cheers

[Lovells Springs for 110 - any advices?]

Hi Tomas, I have the same problem on my 110 Station with the HD coil spring from Paddockspares which I have fit 2 week ago. I think that the coil springs at Paddocks are no genuine Parts because there was a Britpart Lable on it "Britpart corresponding to NRCxxxx".

At the moment I don't know it I put spacers under the rear springs or if I buy a new set of coil springs

regards,

Markus

[Britpart Super Gaz Shock Absorbers]

Hello,

is anybody there who have experiences with the "Britpart Super Gaz Shock Absorbers". I want to fit these shocks in combination with genuine LR HD springs.

Thanks

Markus