[lockheed caliper comparison]

thanks for the replies .. just what i wanted to know best is to measure pistons and they were 4 pot sorry i should of added that.. 3 seal kits incase and a bit of diy to clean em up a bit so much more pleasure when u do it yourself thanks again for your help very much apprieciated ..

[lockheed caliper comparison]

Spot on with the forum for your quiestion, Welcome to LR4x4.com & the info below should help solve your problem

AEU is he prefix of a Unipart part number not a serial number [iIRC], it's full number is AEU2539 piston seal kit caliper

my EPC says you need this piston kit LR part number STC201 for chassis numbers HA 701010 To KA930455. or the earlier piston kit 660683

all older 90 & 110's have single pipe to the front calipers.

thanks for your reply would the earlier piston kit 660683 be the same as STC201 piston ? .. i know its a different axle for both, should i order 2 sets or is there a difference i can quote for order .. maybe measure piston or something .. as it would be a order by post and some can be a pain for returns thank so much for your help tried to look for axle number but it looks so nice sprayed and sealed looks like i will have to scratch the paint off and look harder dam

[lockheed caliper comparison]

hope this is the right place for post ..trying to order pistons and seal kit for a pair of front caliper on a 90 which is c reg and been already modified .. dont know if they axles are original.. the problem is i have lockheed 3247-637c front calipers .. with 1 brake pipe feed.. no abs.. solid disc's.. when i phone paddocks they say they cant recognise the calipers as the serial should start with maybe AEU .. have they stopped making these calipers or is there a comparison or do i need tto buy new ones thanks in advance nick