[series 3 88" locking breaks]

Thanks to all for your assistance, brakes now fully operational

[series 3 88" locking breaks]

Thank you both for your advice, 1st time ive used the forum, brakes now unlocking after use, although pedal goes to floor 1st time of use then ok after, I'm hoping to cure this on adjusters. Much appreciated

[series 3 88" locking breaks]

Thank you for the advice, I'd tried everything other than altering the push rod length, I'll give it ago

[series 3 88" locking breaks]

I have a series 3 88", I've replace the break lines, master cylinder, shoes, slave cylinder(pistons) springs, adjuster, a wole new system. when I apply the breaks the shoes do not return & lock on the only way of releasing them is to open a bleed nipple & relapse the pressure. The system is a single pipe system , with no servo. Any advice gratefully received

[Series 3 braking problems]

I've replaced brake: cylinders, pipes, master cylinder, shoes, springs, adjusters. The shoes are locking on & drums are hard to get on & off, the peddle is hard to push but goes to the floor, on my L reg series 3, no servo fitted. Any advice gratefully accepted.