DiscoClax Posted May 27, 2010 Share Posted May 27, 2010 Howdy all, OK, so I've searched through the forum and found all the info I could on different speedo driven gears applicable to RRC/Disco1 and collated it and attached it here for ease of reference... There's some really good info there, so thanks guys I've got a '94 Disco 1 V8 (3.9 EFI) so I'd have to conclude that I've got a blue 20t gear (FRC3310) factory fitted. With my 31" tyres, the speedo is pretty much dead-on (error of <1%) - GPS verified. I'm about to fit 4.10:1 diff gears (to replace the standard 3.54:1 gears), so that'll increase the speedo reading (and engine speed) by 15.8%. Increasing the number of teeth on the speedo gear to 23t (FRC9339) will slow down the speedo signal by 15.0%, which should bring it all back to an overall error of around 1-2% which is perfect. Are there any flaws to this logic that I'm not aware of? Like issues with swapping the speedo gears, or finding them, or a change to the sender/cable/housing/output shaft gear/whatever that doesn't allow this? Does anyone know the colour of the 23t gear? Apart from potentially having to replace the o-rings on the sender, are there any other "consumables" that may be required for this job? Also, where could I procure a 23t speedo gear in SE Oz? Please don't mention LR dealers, as my mortgage is already maxxed-out. Cheers Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.