hardyspicer Posted November 9, 2010 Share Posted November 9, 2010 I have part NRC5415, plastic clip for holding the fuel lines to the chassis. It seems to be all one piece when I was expecting a part like the brake line clips where the clip is pushed into a plastic insert in the chassis. I`ve looked at pictures on various parts` suppliers and they look like the clip I have. I can`t see how the clip will stay in a hole drilled in the chassis. If anyone has any advice I would be grateful. John Quote Link to comment Share on other sites More sharing options...
Disco-Ron Posted November 9, 2010 Share Posted November 9, 2010 You need to drill a hole the size of the small end, a tight hole! then insert that, and then tap the pipe holder end into it, the shaft should be slightly wider and therefore create the grip! Quote Link to comment Share on other sites More sharing options...
hardyspicer Posted November 9, 2010 Author Share Posted November 9, 2010 Disco-Ron Thanks so much. Did a test in the shed and success. Thought it best not to try on the chassis in the dark. I once had a nasty experience supergluing my hand to the windscreen in similar circumstances. John Quote Link to comment Share on other sites More sharing options...
Disco-Ron Posted November 9, 2010 Share Posted November 9, 2010 You can't give us a snippet of a story like that without telling us the rest................. what the hell where you doing....LOL... glad clip worked..!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.