Jump to content

paulnipper

Getting Comfortable
  • Posts

    12
  • Joined

  • Last visited

Reputation

0 Neutral
  1. Fitted new injectors and its the same What whould u guys do next ???
  2. I was thinking injectors so a set is in the post ..
  3. https://youtu.be/LkE-KY4xhJw My 200tdi is smoking on start up From cold. Smoke is white with a hint of blue and its popping ! Clears up arfter about 4 mins What you think ?? If my link dose not work The video is on youtube Under : 200tdi smoke on start up
  4. Thanks guys ive got lots of white / blue smoke on start up and just want to make sure its not the injectors b4 changing the valve stem seals ?
  5. I need to test my injectors but there is no one near me to test them so I was wondering if I could remove them then loosen the injector hose nuts on the pump then fold them back then fit injecter and return line and then turn over the engine to c if thay are spraying ok and not leaking whould this work and be ok ???? dont want to damage anything I did do a search but found nothing .... thanks
  6. update.. ive taken the pipe of the bottem of the turbo and started the car [car was already warm] and oil was not dripping but it was wet so i decided to look at the turbine wheel movement and it spun freely with no noises no movement up down,left right,in out so i cleaned the out side of the housing with degreaser and removed any trace of oil around housing and actuator ...looked like new 100miles later !!! small amount of oil round the back of the housing in between the chra and the compressor and the actuator arm is wet with oil but not dripping is this ok ? as for the smoke ..... im going to cheek the pump timing then have the injectors looked at over the week end one more thing . arfter removing all oil and dirt of engine with de greaser and presser washer 100miles later my lift pump looks a bit wet with diesel ...this ok ? again blue/white smoke more white than blue will clear when i get to the top of my road about 1/4 mile thanks guys
  7. Thanks guys I'll have a look arfter work This sight is going to be great help to me :-) I'll let u no how I get on
  8. Ah so you think it could be valve stem seals ok one more thing is thers abit of oil coming out of the wast gate actuator is this normal ?? How much will a garage carge for valve seals to be changed ?? Thanks guys could do it my self but dont have time at the mo
  9. Hi all first of this is my first post so I will say hello :-) I joined this forum as I think my turbo seals have gone I have spent the last 3 days searching on this forum and reading different posts about similar problem and every thing is pointing to my turbo seals ... so just to be sure i'm going to tell you my problems and see what you think . Right .....when I start her up from cold I get lots of white/blue smoke, gets worse when I rev her but after about 1 mile or if she's warm the smoke goes away ( only noticeable at night a bit ) So I investigated and found oil almost dripping from the bottom intercooler hose,took of hose and found the pipe to be wet with oil but not pouring out ..opened top hose and same again with a small puddle of oil in pipe cleaned all pipes then fitted them . checked them again after about 400miles and same again It's not my breather as I have a catch can fitted so what do u think thanks
×
×
  • Create New...

Important Information

We use cookies to ensure you get the best experience. By using our website you agree to our Cookie Policy