Hi all, let weekend I was up in the mountains with my 2001 td5, noticed a bumpy ride, so pulled over and noticed the rear suspension was on the bump stops (both sides).
Checked fusible link & relay, both fine. Called my recovery service who came, tested the compressor and told me it's getting power but not running.
Had the car recovered home, ordered a new compressor and fitted that today. Tested the old compressor, it's fine. Checked if power was getting to the unit & it is not.
Manually overriden the relay and the compressor fires up (suggesting a Slabs error?) but although the compressor is running, the suspension will not pump up to road height. Air is getting to the airbags to fill enough air to 'shape' them with the back end jacked up, but once I lower the jack, it's sat on the bump stops....
Removed the driver side sensor, it looks nackered so I will order 2 new sensors, but that doesn't explain why both sides dropped and with the ECU over riden, the bags won't inflte...
My next plan is to order 2 new height sensors and a Nanocom incase IT has somehow put itself into transport mode (is that possible?)
Does anyone have any suggestions as to why the bags won't inflate with the Slabs ECU overriden (bridging the relay).
Thanks in advance!
Andy
