Jump to content

The_rayess

Settled In
 View Profile  See their activity

  • Posts

    34

  • Joined

  • Last visited

 Content Type 

Everything posted by The_rayess

  1. The_rayess
    Yes i rebalanced it ! And change 1 uj i noticed the other one have slightly movement maybe i will re change it but now the sound is almost gone i think
  2. The_rayess
    Today i will be shortening my driveshaft and replacing u joint
  3. The_rayess
    Thanks everyone for the help I appreciate it guys 🙏
  4. The_rayess
    I made one in my friend shop specially for the yota driveshaft so i can keep it !
  5. The_rayess
    I will ask about it
  6. The_rayess
    I will do it tomorrow thank you 🙏
  7. The_rayess
    Yes toyota also have it !
  8. The_rayess
    Yes i dont have problem with angles ! Its fine ! I think my problem with the length of the driveshaft ! Its like arrives to stop no more sliding in ! It should be shorter i think tomorrow i will make measurements!
  9. The_rayess
    Thank you ! Do you k ow whats the minimum length of the driveshaft can be ?
  10. The_rayess
    Aha yes i know the shock absorber boot ! But never think about puting it on a driveshaft thats a good idea 🙏
  11. The_rayess
    Yes i will change it for sure! Yes i drilled the flange on the transfer case ! Whats the shortest driveshaft i can use in length ?
  12. The_rayess
    I will grease it for sure but what do you mean by get a boot for it ?
  13. The_rayess
    IMG_4144.MOV IMG_4146.MOV
  14. The_rayess
    Its blur from the camera ! Its all welded i checked today the ujoint its bad and the driveshaft slide in and out but i think the problem is its almost all in nothing left i will post pictures and video
  15. The_rayess
    Tomorrow will check
  16. The_rayess
    Tomorrow i will remove it and check for everyrhing
  17. The_rayess
    Thats it the front uj near the transfer case there makes a sound up and down !
  18. The_rayess
    Yes tomorrow i will take pictures its a short driveshaft due to dual case that i made the front one slide in and out freely without a nut !
  19. The_rayess
    My driveshaft is one with a nut it doesnt slid in or out ! Its like fixed !
  20. The_rayess
    For sure i put my 5.29 gears !
  21. The_rayess
    Its a lt230 with toyota axles ! Same drop as the lt230 outputs !
  22. The_rayess
    What do you mean by free ?
  23. The_rayess
    Yes disengaged !
  24. The_rayess
    Yes sure same ration 5.29 front and rear
  25. The_rayess
    I am not sure that the rear output shaft bearing is damaged ! No play ! I will check it tomorrow because i didnt drive it too much ! I will check both of it !!
×
×
  • Create New...

Important Information

We use cookies to ensure you get the best experience. By using our website you agree to our Cookie Policy

  I accept