[TD5 Wheel bearing]

I goes in between the two bearings.

[Is my TD5 overheating?]

Get another thermostat.

I had exactly the same issue and my stat was changed. Problem persisted so I got another thermostat and it was solved.

[Hot LT230 Transfer Box]

I have a temperature gauge on my transfer box and 90 to 100 Deg C is normal on a long highway run.

[Calling Porny]

I need to order can't seem to get you via PM or email.

[Defender rear wheel carrier ... with jack mount]

Sorry to butt in - did you say Scorpion Racing went under?

[Newly fitted r380 gearbox - Tough gear change in 3rd?]

I recently had a rebuild R380 installed and finding 4th was hard. Adjustment to the linkage did the trick - call Ashcrofts.

[Spare Wheel Mounted On Hard Top Side Panel]

The ultimate solution to the 2 spares and the rear door issue. Designed & manufactured in the best colony - South Africa.

Make something like this up?

http://www.iefeng.co.za/replacement_bumper...over_90_110.htm

[Filling Swivel]

Thanks Western

It was 3/8. Ok so I only have the one plug is this then a fill and level point?

Rave says put in 375ml - I put in 500ml Castrol EP90 and it was not filled to the plug.

Have I over done it?

[Disc to Hub what torque?]

Thanks All

[Filling Swivel]

Thanks everyone

Dan great pics but my plug does not have the raised 13mm square but a recessed square?

[Filling Swivel]

Thanks

I see the plug on top with a square recess, what do I use to open this?

[Filling Swivel]

Hi

Where do I fill the swivel ball?

[Disc to Hub what torque?]

Many thanks Nige

[Disc to Hub what torque?]

I have read the post on changing front disc brakes and am busy with the job. (Thanks Les)

The manufacturer of my new break discs says that it is imperative that the discs are not over tightened to the hub.

I have looked in Rave but can’t find the torque setting for these bolts.

It is a 2002 TD5 110.

[Replacement Crankshaft for TD5]

Thanks guys

[Replacement Crankshaft for TD5]

Hi All

I need a new crankshaft for a TD5 and have 2 options presently - Britparts or LR Original. LR is double the price so any opinions would be appreciated.

Cheers

Ashley

[Fitting new VDO gauges]

You might want to take a look at these video's.

Not the identical job to yours but it might help.

http://www.madman.co.za/ems_installation_video.htm