Jump to content

Athena

Settled In
  • Posts

    37
  • Joined

  • Last visited

Reputation

0 Neutral
  1. Hi All I hope you are all ok and well I recently posted on the forum an bad experance with my breakdown company, the breakdown company dose not cover any repair that may fail. So I would like any recomendations for a good breakdown cover company, I have searched the net but before I hand over my money your words of wisdom would be great Cheers Dan
  2. Hi All I have had nothing but bad luck with my Defender, 1986 2.5tb, i have it repaired back in February and MOT, she had to have a part rebuild on the head, I had :- Blown Head Gasket Hot spots dropped Misfire on N04 Inject I had other work carried out to pass MOT, however less then 500 miles after the all the repair work, New Head Gasket, New No4 Inject ore, Head skimmed and New Hot spots, as arrived from Sheffield to Lincoln i lost power and started to burn lots of black smoke coming from the exhaust, she stalled and was a bugger to start, when i got the landie home, off the back of a low loader, starting the landie was even harder to start, with white smoke coming from the exhaust then turning black, the road side breakdown service have diagnosed the problem as a cracked head letting in air!!! To make things worse, the breakdown company charge me £236 to bring the landie home because they think the fault could be related to the repair, i have to prove to them that it is or isn't to get some of my money back, talk about robbing sods! whats the point in having breakdown cover! I know this is a moan, but dose anyone think could it be related to the repair, if the head is cracked, dose this mean new engine? I am a very dishearten landie owner on the edge of selling!!! and I was so looking forward to the Driffield Landie Show! Cheers dan
  3. Hi guys Thanks for the heads up, i am not losing water or smoking white, it's a dirty oily not blue, my temp gauge is normal but worryingly my heater did pack in before Christmas!!! Cheers Dan
  4. Hi All I hope every is well, just wanted to ask a silly question, what are the typical symptoms when a head gasket has gone? my landie is has gone pretty noisy (2.5TD 1986) but not sure whats happened, i didn't loose any power at the time i notice the extra sound coming from my engine the only reason i mention the head gasket is oil, i appear to be burning more than usual ideas would be welcome Cheers Dan
  5. Hi All Thank you for all your advice, I did have a steering lock on and the last time they tried to steel her they had cut through the steering wheel, but i had removed the battery, I have ordered a battery cut off switch and a peddle lock box!! should be here any day, as for the dog sleeping in the landie the wife wouldn't let me!! Fantastic all of you! cheers Dan
  6. Hi WarPig I am in S8!! Lowedges Be careful mate Dan
  7. Hi All My Landie has survived 3 nights of HELL!! some scrotes have had ago at steeling her, 3 times in 3 nights, This is in Sheffield please be aware! I have replaced the ignition lock, but the cowling around the steering column is shattered I have looked on Rimmer Bothers and paddocks, no luck can any help me with where I can get the replacement parts please Cheers Dan
  8. Thanks for for yuor advice, i am really sorry about the gromit! i miss read the reply Cheers Dan
  9. Hi All I have a duff battery!!! the first cold weather and duff!, i have taken it off and now charging it up, but as the weather gets colder will properly replace it I was wondering if anyone can recommend a simple battery tester/alternator, i need to make sure my alternator is charging the battery properly, something that will give me an voltage out put reading when battery receiving a charge from and under load thank you Dan
  10. Thank you Gromit!! Top job, replaced the flasher unit, and we are working, well sort of, the faulty unit had 4 prongs, but the spares place only had 3 prongs units, but we are working, i thinks it's because the faulty unit was for a trailer set up, Cheers Dan
  11. Hi All Ideas please??? I have replaced the Hazards light switch, but indicators and hazards still not working!! i have checked all fuses and they are fine, the indicator switch works the horn, head light flash and main beam they are fine too, i have power going to the hazard warning switch, i am thinking it could be the flasher unit, but i am at a lost i not even sure were that is? please help Dan
  12. Hi All Hope everyone is well! Quick question, my indicators are not working, left or right, and the hazards are not working too, i have checked the fuses and they are fine, My horn and flasher are working, could it be the relay? any ideas with clear direction will be great received Thank you All Dan
  13. Ah I see, i thought that but the wratchet i have is too small for this, i will need to buy a 1/2" wratchet! Cheers Dan
  14. Hi Bishbosh I need to take out the filler bolt out, but with the ratchet i have and i/2 drian plug key will not fit in the gap between the transfer box and hand brake drum Cheers Dan
×
×
  • Create New...

Important Information

We use cookies to ensure you get the best experience. By using our website you agree to our Cookie Policy