Lurch89

Its a short wheel base, with 10" rims on it. The snail cams have been wound right back but, that does sound a good idea to centre it. I wasnt sure if they were just touching as they were new. Thanks Sam

I have recenlt rebuilt the axles and brakes with new drums and cylinders on my serirs 2a. But now have the problem of when i put the drums and the small fixing screw back into place in the hub the axles cant turn. However when i dont place the screw back into the hub the axle can move freely. I cant check to see if it moves when driving as the engine has not yet been fully fitted. It could be a case of the hubs being tight on the drum brakes but the fact that it isnt affected when the screw is not inplace. Any ideas? Thanks Sam