[abs senors]

When I fixed the ABS on my discovery it still needed test book to turn the lights out.

HTH

Ivan

thanks mate its looking that way

when i turn ignition on the hill desent light is green then goes out as it sould

tc and abs are still on

the hill decent works as it should

but when i go over 10mph the hill decent light goes amber and stays on

also when i go down the road and jam the brakes on the abs is working

ian

[abs senors]

hi

ive just done my nsf wheel bearing and wrote off the abs sensor in doing it

(a dear lesson lernt) £90 later i fited the new sensor and set it with a 0.050mm feeler gauge

it was tight on the feeler not a nice slide feel but the three lights on my dash still havnt gone out

1/ do they need resetting

2/ could my abs be working but they need resetting

3/ could the sensor be dudd

someone please help me its starting to worry me i use the freeby off road in the winter a bit and

the hill desent is great for getting out of stickydeepish mud

cheers wabbit

[Freelander discs, pads, and caliper sliders?]

hi every body wabbit here im new so a big hello

ive just rebiuld my nsf hub (changed bearings)

i noticed one of the brake sliders was seized solid

it took a big slide hammer and some time to free it

but it cleaned up ok and with a lot of copper slip when going back it works fine

while going through the different 4x4 sites i noticed they sell new for about £7 a set of four

best of luck to every one!!!!