[LT85 With a 200Tdi]

can i fit a 200 tdi engine onto my lt85 that is on my 90

it did have a v8 but even with lpg i cant get the economy or range so with sadness i have gone for a 200tdi out of a disco

thanks mog

[disco t-box and gearbox]

hi you will find the lt77 from the disco has a longer bell housing and the gear stick is in a different place check out ashcroft transmissions website

pete

[V8 out , TDi in]

just for all you 200/300 TDI lovers don't forget that from 2012 you wont be able to drive within the M25 as you wont meet the emissions.But if you keep the V8 and put Lpg on it you will be clean and green. my v8 only runs on Lpg and i love it

The sound of a v8 is greatttttt :D

mog

[gut less 90]

Hi i have just got a 1985 v8 90 (last 3 landrovers were discos)it currently only runs on LPG, i have got a kit to rebuild the carbs.i find it gut less it hates hills i no running on lpg causes some loss in power but this seems really bad

it is running on 235/85/16 are they the problem or is it likely to be the 150k the engine has done.

thanks pete

[Prop Shaft]

Anyone out their got any details of custom made props as i will need 2 for my series as i am fitting a v8 with a LT95 with overdrive

thanks mog

[Carb or Efi]

well it looks like i will use efi then

as it happens i have got a disco v8 with a efi and my series will need a full rewire as their is not one wire in it.

I will have to merge a 110 loom with a disco loom good job i am not colour blind

MOG

[Carb or Efi]

Hi i am putting a v8 into my 2a at the moment but do i go for Efi or Carb

thanks mog

[Range Rover axle in series 3]

That's what I have done. I want to fit a 110 front axle to a SWB series 3, so I cut just about all of the old bracketry off - except for the bump stop, then made up seats for the leaf springs. I made a mistake with the diff nose angle/castor/etc, so ended-up having to cut the ends of the axle off and repositioning them.

A few pics - I took loads

Les.

can some one tell me where i can get the brackets form as i am thinking of doing the same

thanks mog

[Springs or Leaf]

Hi guys

Need some help i currently own a series 2A which is in bits and a 200tdi disco which sits on a 4" lift with +5" shocks.do i sell the disco or use it as a donor.if i use it as a donor how far would you go.

1 : do i strip it down and swap things to my series and keep leafs.

2 : do i chop it down to 88" keeping the coils fit series out riggers and cross member.(and hope mot station do not spot that it is no longer a 1968)

Thanks Mog

[Engine]

Hi my wife has just bought me a 1965 series 2a swb it was a 2 1/4 petrol but some one has dropped a 2.5N/A in it can any one tell me what they are like as i am thinking of putting at 200tdi in it.

thanks mog

well after starting her up she leaked oil out big style so its coming out and i am going for it.

i am going to fit 200tdi lt77 r230 and disco axles.

mog

[Engine]

Hi my wife has just bought me a 1965 series 2a swb it was a 2 1/4 petrol but some one has dropped a 2.5N/A in it can any one tell me what they are like as i am thinking of putting at 200tdi in it.

thanks mog