Jump to content

w_heily

Getting Comfortable
  • Posts

    14
  • Joined

  • Last visited

Posts posted by w_heily

  1. Well it was out of my old mans 110 it was fine in that but that got stolen and burnt but this transfer has been sitting for ten years now with out being moved i only put an lt230 behind the tf auto because the schuler voith viscous transfers chains snapped and that was a bit of a mission to change the first transfer i got was a 1.003:1 it was well warn and too high geared it jumped out but only after being in low it was noisy and had slop in it too but this 1.41 is good other than it jumps out you can drive it round for two days and then it will do it some times i have to hold the lever back to keep it in i took the linkage off and engaged it at the selector and it still jumped out

  2. heres my one its a 83 schuler conversion the tansfer snapped the two chains so now its got a lt230

    its been ten foot under water which is a long story i put 31's on it and lancruiser 80 series two inch raised front shocks in the front to get the full travel out of my front springs

    has 45mm spring spacers all round and already had rear spring locators when i got it

    post-21122-126249603059_thumb.jpg

    post-21122-126249634671_thumb.jpg

    post-21122-126249639206_thumb.jpg

    post-21122-126249644751_thumb.jpg

  3. i have a ex 83 schuler range rover i had a pair of chains break in the schuler case which are imposible to find

    so i went through changing the transfer to a std lt230 auto case which is 1.003 ratio the old one was 1.192 and was viscous

    now i finally gotten sick of how much more gutless it is so i put in one out of a 110 which is 1.410 and i found the differances

    were the difflock arm on the transfer was shorter the selector linkages were differant and the actual high low selector is

    differant even internally and i noticed when i had to take it apart that the center diff carrier was alot stronger in apperance

    it will mean that il be doing 3600rpm at 110kph with 31's the old setup with the schuler did 3500 with 225/75r16s

    the other option was to put s2a rover diffs in which i have here but desided not to becuase they need shiming

    i heard some of these lt230s came std with lsd centers in the early ones

×
×
  • Create New...

Important Information

We use cookies to ensure you get the best experience. By using our website you agree to our Cookie Policy