def130

thanks for the advice

Thanks Any especial brand ? Because I have been reading that britpart are a no go The budget is not big, but I’m willing to pay some extra for a better drive

Evening all As usual I’m after some help / advice – After spend loads of time sorting the Pto Superwinch 525, is near ready to be fitted (only one UJ to be bought), but before that I need to re-bush all the car, change rear shock, so I’m in need of some advice in what to use. – Should I upgrade the front suspension? After the extra weight. If so with what? My next buy will be a roof rack – to be used when camping My idea of off road is some type of green lane, nothing to hard, I use it every day to commute to work 15m/day, and at weekends mostly motorway to rescue dogs Thanks in advance for any advice

Land Rover Discovery 2000cc petrol 1993 * Engine Gasket Set * Cylinder head bolts kit * Crankshaft seal - Belt side & Clutch side * Clutch kit * Piston rings set * Sump gasket * Exhaust Valves * Inlet Valves * timing / distributor kit

And after all is hard work, Mrs God rescue 2 Japanese Akitas and He ask Foley's to Make a 130 SW Because He couldn’t be asked

Advice needed Just find out the my “green shed” needs new bushes full set, before I put the winch My question is what type I should put, original after market polibushes red,blue etc I use my 130 everyday to commute to work 6 miles each way and for some green lane nothing to hard What are your advice and place to buy?

i will be there on Sunday...

My is an ex-RAF and had come with leather gaiters but I had removed them 2 weekends a go because the leather had several holes, should I replace or not?

thanks, i will use normal grease

Now I have a question should I put any kind of grease like copper grease between the shaft and drum or something like I already read somewhere on the forum the "one-shot " Please some advise, i'm trying to assembly the winch over this long weekend Thanks

Manage to separate the drum from the shaft with a hydraulic puller (fantastic piece of kit) that I already put on my list of tools to buy After a good clean and some sand paper the drum rolls as it should. Now I have a question should I put any kind of grease like copper grease between the shaft and drum or something like I already read somewhere on the forum the "one-shot " Superwinch have send a manual for my Winch and PTO, could someone from admin add this on http://forums.lr4x4.com/index.php?showtopic=16479 Is for a 525 and a 6440 PTO Land Rover 525 Kit 6440.pdf Thanks in advance for any advise

Thanks for all advise I can remove the dog clutch 5 by and hand. drum 14 and drum shaft 16 don’t move so I have spray some WD40, but I will put this in diesel as advised Have already someone change the bearing 40? Leaking heavily what is the way to remove cap 35 Thanks in advance

The situation is I can't make the connection, Do you think I need to find someone with a press machine and have the drum removed from the shaft? Or assembly the winch and try to release the drum when making the test? Sorry be so upsetting but I don’t want make any mistakes / damage Thanks in advance

Hi again After spend some time looking with more time to the winch find that I will need a new cable before fit it to the LR, so after remove the roller fairlead (and find that one of the bolts was broken another think to solve later) find this situation Now I have a question. Should the drum rotate easy? If not how can I engage the Winch? Have a leak from this place and a broken mount. From the manual I will need to remove the Allen screw (that I manage to do) and after that the black plastic cap how???? Just call Superwinch and they don’t have any spares parts, does anyone know where to find parts? Can someone recomend any place around Coventry

some pictures from my winch, can someone please identify this please Do you think this will fit my 300 tdi Thanks for any help in advance

Hi again Manage to find another PTO winch only 100 yards from my house The owner doesn’t know/ remember from what Defender that had come from, because was a old friend that had give him the pto, during the time he had a 110 300tdi but he never try to fit it. So I have manage a good deal After giving a good look (already in my garage) to try to find any ref on the PTO or winch I have found Winch - Serial No 525/*550 PTO – is marked 6440/525 by hand and the casing number is 5407 My question is can someone please let me know if will fit my 300tdi, pictures are welcome too Thanks in advance for any help

Thanks for the reply, Western Can someone please let me know what is a fair price for one of those Thanks in advance

Hi all Found this one on Ebay item 170473418877 Can someone please let me know if this will fit a 130 300tdi Thanks in advance for any reply

Hi all I'm a newbie, so please go easy with me I’m the proud owner of a 130 Station Wagon with a 300tdi engine transformed by Foley’s, I’m asking for some information regarding a PTO Winch, does anyone have one for sale or know here I can find one? Have saw a few on Ebay but they are or for series or TD5, I have been told the TD5 don’t fit because of the different gear box location, can someone please let me know if is possible fir one from a series? Thanks in advance for any advise.