[Suspension advice]

thanks for the advice

[Suspension advice]

Thanks

Any especial brand ?

Because I have been reading that britpart are a no go

The budget is not big, but I’m willing to pay some extra for a better drive

[Suspension advice]

Evening all

As usual I’m after some help / advice

– After spend loads of time sorting the Pto Superwinch 525, is near ready to be fitted (only one UJ to be bought), but before that I need to re-bush all the car, change rear shock, so I’m in need of some advice in what to use.

– Should I upgrade the front suspension? After the extra weight. If so with what?

My next buy will be a roof rack – to be used when camping

My idea of off road is some type of green lane, nothing to hard, I use it every day to commute to work 15m/day, and at weekends mostly motorway to rescue dogs

Thanks in advance for any advice

[Land Rover Discovery 2000cc]

Land Rover Discovery 2000cc petrol 1993

* Engine Gasket Set

* Cylinder head bolts kit

* Crankshaft seal - Belt side & Clutch side

* Clutch kit

* Piston rings set

* Sump gasket

* Exhaust Valves

* Inlet Valves

* timing / distributor kit

[Defender 110 vs 90]

The Lord made-eth the 80, 86, 107, 88, and 109, and on the 6th day he rested (to sooth his sore bum from the leaf springs. On the 7th day he made the 90 and his bum was happy. But Mrs God was not best pleased "how shalt we cart the shopping around with all the desciples in the 90? verliy thy must try again and make summat else". So the Lord came up with the 110 - to cart his portly self around, the Mrs, the desciples, the shopping, and the occasional trip to the tip.

Jesus and Mary borrowing it on the odd weekend to go crashing around in the garden of eden - to pinch apples and run over snakes.

Les

And after all is hard work, Mrs God rescue 2 Japanese Akitas and He ask Foley's to Make a 130 SW Because He couldn’t be asked

[def 130 bushes]

Advice needed

Just find out the my “green shed” needs new bushes full set, before I put the winch

My question is what type I should put,

original

after market

polibushes red,blue etc

I use my 130 everyday to commute to work 6 miles each way and for some green lane nothing to hard

What are your advice and place to buy?

[Heritage Land Rover Show]

i will be there on Sunday...

[SWIVELS]

My is an ex-RAF and had come with leather gaiters but I had removed them 2 weekends a go because the leather had several holes, should I replace or not?

[pto winch 300tdi]

thanks, i will use normal grease

[pto winch 300tdi]

Now I have a question should I put any kind of grease like copper grease between the shaft and drum or something like I already read somewhere on the forum the "one-shot "

Please some advise, i'm trying to assembly the winch over this long weekend

Thanks

[pto winch 300tdi]

Manage to separate the drum from the shaft with a hydraulic puller (fantastic piece of kit) that I already put on my list of tools to buy

After a good clean and some sand paper the drum rolls as it should.

Now I have a question should I put any kind of grease like copper grease between the shaft and drum or something like I already read somewhere on the forum the "one-shot "

Superwinch have send a manual for my Winch and PTO, could someone from admin add this on

http://forums.lr4x4.com/index.php?showtopic=16479

Is for a 525 and a 6440 PTO

Land Rover 525 Kit 6440.pdf

Thanks in advance for any advise

[pto winch 300tdi]

Thanks for all advise

I can remove the dog clutch 5 by and hand.

drum 14 and drum shaft 16 don’t move so I have spray some WD40, but I will put this in diesel as advised

Have already someone change the bearing 40? Leaking heavily

what is the way to remove cap 35

Thanks in advance

[pto winch 300tdi]

The situation is I can't make the connection,

Do you think I need to find someone with a press machine and have the drum removed from the shaft?

Or assembly the winch and try to release the drum when making the test?

Sorry be so upsetting but I don’t want make any mistakes / damage

Thanks in advance

[pto winch 300tdi]

Hi again

After spend some time looking with more time to the winch find that I will need a new cable before fit it to the LR, so after remove the roller fairlead (and find that one of the bolts was broken another think to solve later) find this situation

Now I have a question. Should the drum rotate easy?

If not how can I engage the Winch?

Have a leak from this place and a broken mount.

From the manual I will need to remove the Allen screw (that I manage to do) and after that the black plastic cap how????

Just call Superwinch and they don’t have any spares parts, does anyone know where to find parts?

Can someone recomend any place around Coventry

[pto winch 300tdi]

some pictures from my winch, can someone please identify this please

Do you think this will fit my 300 tdi

Thanks for any help in advance

[pto winch 300tdi]

Hi again

Manage to find another PTO winch only 100 yards from my house

The owner doesn’t know/ remember from what Defender that had come from, because was a old friend that had give him the pto, during the time he had a 110 300tdi but he never try to fit it. So I have manage a good deal

After giving a good look (already in my garage) to try to find any ref on the PTO or winch I have found

Winch - Serial No 525/*550

PTO – is marked 6440/525 by hand and the casing number is 5407

My question is can someone please let me know if will fit my 300tdi, pictures are welcome too

Thanks in advance for any help

[pto winch 300tdi]

it's a 525 mechanical PTO driven winch so it should fit.

Thanks for the reply, Western

Can someone please let me know what is a fair price for one of those

Thanks in advance

[pto winch 300tdi]

Hi all

Found this one on Ebay item 170473418877

Can someone please let me know if this will fit a 130 300tdi

Thanks in advance for any reply

[pto winch 300tdi]

Hi all

I'm a newbie, so please go easy with me

I’m the proud owner of a 130 Station Wagon with a 300tdi engine transformed by Foley’s, I’m asking for some information regarding a PTO Winch, does anyone have one for sale or know here I can find one?

Have saw a few on Ebay but they are or for series or TD5, I have been told the TD5 don’t fit because of the different gear box location, can someone please let me know if is possible fir one from a series?

Thanks in advance for any advise.