PaddyZulu
-
Posts
6 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by PaddyZulu
-
-
Good to keep this post running for updates as I was about to post "Lack of A/C-common causes please"
Got my '94 300Tdi Disco back in January and the A/C appears not to work, though I think some cooler
air comes through the vents compared to ambient ram air temp.
Have checked fuses and wondered if it was a simple regas required.
One point please guys, can you hear an audible click from the compressor clutch when turning the system
on and off ?
-
Thanks again for the info, its just occurred to me though that its the fill plug I need that needs a T55 Torx to remove it.
At least I can search the links you advised to find it.
Cheers
Found it and blow me down Rimmer has it, just got to work out a plan to get the old one out now !
-
Thanks again for the info, its just occurred to me though that its the fill plug I need that needs a T55 Torx to remove it.
At least I can search the links you advised to find it.
Cheers
-
Drain plug is part No FRC6145, and sealing washer is part No FTC4112. You should be able to get these from the usual L/R parts suppliers.
Les.
Thank you for the timely and comprehensive reply with numbers too Les, I had looked in my Rimmer catalogue and online to no avail.
-
Someone previously has written off the plug on my gearbox, even to the point of attempting to chisel it off !
Would anyone know where I can get one, as its going to be a mess if and when I get it out.
Front/Rear Wheel Hubnut size
in Discovery Forum
Posted
Would appreciate if someone could let me know the size of socket required for the nut, I need to adjust the wheel bearings as they were on my last MOT advisory as slight play