karlo
-
Posts
112 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by karlo
-
-
Mine does the same except when the rear (boot) door is open it's fine, start to close the door and the fuse goes so must be hitting earth somewhere, I'm waiting for better weather to investigate.
-
MOT'ed mine last Thursday and he never mentioned about the Cat or the egr being removed, I take it year after year to the same place, he knows the car and all the mods which I have done.
-
Sure I have a couple of spring seat's somewhere, I will have a look and you can borrow one to take measurements If I can find them.
-
Quite easy although there are thread adapters in the bottom that have to be changed are can be a right female doggy to get out, I just replaced mine as they weren't too expensive.
-
Depends on what type you have?
-
i am after some info ie: does it make the ride alot firma? corners better? etc
Regards
If your ever up this way your welcome to come and see for yourself!
-
mine does it on 265's with a defender T box fitted.
-
I have Terrafirma big bore expedition shocks on my disco, it's lifted with Britpart front and Bearmach rear springs, + 2" shocks and 1" spacers its has Adrenalin rear arms and Scorpion fronts which are both fitted with polybushes, I get a slight wheel wobble on bumps and it pulls to the left, I have an adjustable panard rod to fit which I'm hoping (fingers crossed) when tracked will cure both issues, wheel wobble was worse before I removed the Procomps and fitted the Terrafirma's.
-
Transfer boxes as standard are 110 : 1.6, Disco : 1.2 so gearing will be different.
-
Hi Guys
I am wondering if anyone can tell me how to replace the lights in the window switches in the centre console of my Dissco 300 tdi (98). I can not see how to get at the bulbs in them to replace them. Do i need to take them apart to do the work?
Thanks
Hugh
yes you have to open the switch desolder the old bulbs and resolder new ones in.
-
I think Devon 4x4 do a prefilter that fits behind the mesh on the safari head.
*EDIT*
-
300Tdi Auto, I noticed a little bit more grunt low down especially when cold, coupled with a de-cat mad a small noticeable difference at low revs. Don't expect huge power gains
-
Try E bay by the time you have spent looking locally you could get a few delivered.
-
-
Check the plugs on the back of the headlights as these tend to melt and give earth problems.
-
http://cgi.ebay.co.u...=item5adb7aad5e There are 2 flanges one @ 49mm long fitted to 200 series and one @ 61mm long, you need the 61mm long flange stc4858 .
If you use the shorter 49mm flange then you need a 12mm spacer which Ashcroft's do.
-
-
-
90 will, 110 rear springs are larger.
-
Freelander bulb holders are what you want about a fiver each from land rover XBP100190
-
-
-
It's more than likely an air gap on one of the wheel sensors, try tapping the sensor down one wheel at a time and trying the car this will point out which sensor it is (if that is the problem) the sensors are a push fit and when the wheel rotates it makes it's own air gap.
The bush that the sensor pushes in to becomes weak and allows the sensor to move, but I did an easy fix on mine.
-
Brilliant, thanks for all your replies, lots of stuff to try! Ta muchly
P.S Karlo the disco in your avatar look amazing - is exactly what i'm aiming for mine to look like when i'm done with it
The ABS light stays on until you reach 5mph, it's more than likely a wheel sensor (air gap too large) try tapping them down one at a time then you may find the problem 1 which is an easy fix.
Door lock plastic lever/cam
in Discovery Forum
Posted
Some may find this post pointless so I appologise, but it took me ages to find this part number so I thought i'd share it.
STC1219 - Cam Assy Door L Discovery 1 95on
It has the bit on the top for the alarm microswitch.