nick8556
-
Posts
17 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by nick8556
-
-
Hi Kevin
I will watch this with interest because i have the same dilemma on my three door disco!
Regards
Nick
-
Hi to you both.
yes I've checked for a V supply .
Also I've been told by a mate who's a mechanic that self park IS a requirement for MOT
I had the opposite problem last year when mine would just start to work on their own and wouldn't turn off, i tried everything and it ended up being the wiper motor.
have you checked the module that sits on the back of the fuse box can't remember what its called at the moment this controls the wipers speed instead of several relays doing it
Its called the multi function unit (MFU) just had a look at the wiring diagram.
If you still have the spare motor you can check if the motor is ok and the park will work by putting a voltage through it!
Then you will know if you have a problem with the MFU or not
Hope this helps
Nick
-
i guess i was worrying about nothing passed test ok tester said emissions smoke was below normal so i guess cats are not needed nor are egr valves thanks for replies
i removed my cat and it stopped it smoking almost completely, but in saying that the cat was half full of soot so i wasn't breathing right anyway!
Its done 200k and doesn't smoke much now!
Regards Nick
-
can you give us a bit more info on where the bearings are on the vehicle so we can help!
Regards
Nick
-
Have you checked that the wiper motor has a permanent 12 volt supply to it as this is used for parking the wipers
Regards
Nick
-
Thanks Again Jim I have looked in the Haynes manual as well and can't find it there either!!
Its strange how they will put the ratios for the MPI but not for the TDI ?
Regards
Nick
-
Thanks Jim
I found the mpi ones on rave but can't find the tdi ones
Does anyone have the ratios for the R380 TDI box
Regards
Nick
-
Also what years?? Axles have changed over the years.
From Maxi-Drive catalog
Salisbury (110 to 1994) with drums. 665 and 985 mm
Salisbury (110 1994 to ~2002) WITH DISCS 650 AND 970 mm
Don't show the 90 numbers, but again they would change when 24 spline came in.
Later ones with disc brakes
Thanks
-
Does anyone happen to have the gear ratios for the TDI version of the R380 gearbox, just wondering if they are different from the 2.0 litre mpi version?
Many thanks
Nick
-
I have a set down the shed, i'll measure them tomorrow if you still need the info
Mark
Thanks Mark that will save me removing mine to check the length!
Regards
Nick
-
90 or 110?
I thought that they where both the same length but then again you learn some thing everyday!
If you have the sizes of both please?
Thanks
Nick
-
Hello
Does anyone know the length of the front half shafts on a disco from the diff to the cv joint?
Many thanks
Nick
-
Hello
Does anyone know the length of the defender rear half shafts?
Many thanks
Nick
-
Hi there
Did the very same thing with mine quite a long time ago, the local Land Rover specialist hadn't got the tool to remove the injectors and i needed to replace them as they where faulty so i took it to them to put it on there test book to recode the injectors, as you said remove the rocker cover etc using a towel and a piece of wood over the top to stop it from flying out and causing damage to the bonnet.
They weren't to chuffed because they had told me it couldn't be done with out the special tool!!!!!
Regards
Nick
-
Hello All
Thanks for the replies the reason for the longer half shafts is you can't use wheel spacers in competitions!
Regards
Nick
-
Hello
Does anyone know where i can get longer than standard front half shafts?
Many thanks
Nick
Violent Front Wheel Shake between 38 - 50 mph
in Discovery Forum
Posted
I had a mate with a similar problem to this and it was a damaged wheel ( buckled) that was causing the problem
Hope this helps
Nick