swanny
-
Posts
78 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by swanny
-
-
im still trying to get more beer into the fridge. lol
-
my heart goes out to the family.
-
thanks guys think i will have to get my old mans mate to do the welding im carp.
-
hello
how easy is it to renew the inner wings on an 87 rrc do i need any special tools ?. were would be the best place to buy them from.
thanks swanny
-
we have had a bosh 4.5 grinder 110v for the last 15 16 years its done every thing from chopping bolts cutting roofsheets grinding out chases in walls its even removed pointing from detched brick house with out a miss hap. now on look out for a dewalt cordless 4.5 grinder.
buy best you can works out cheaper in the end. watch out for those offers were you buy X amounts of disc get free grinder. disc are carp grinders wont last 2 mins.
-
i will be down there this time.
-
what a great weekend thanks see you in south wales.
-
i made this one from a 1 ton tipping trailer made by lynton. it tows well went all the way to loch ness at a steady 60ish
-
sorry a bit of topic BUT does anyone know of a auto box mech in the west yorkshire area
-
a prefab garage would be cheaper then a block built one. they can make them any lenth and width. if you want to lift anything just build some some hollow block pillers fill with concrete top of with a flag pop rsj on and fasten in place. main thing is the garage base wants to be 6in deep with some steel in.
some time garage firms have drawings you can give to the planners.
good luck
swanny
-
hello
best thing to do is cut some grooves in it were puddling apply a genorus coat of pva glue neat our dilute it a bit. then get some bags 25kg ones.
river sand
grano dust
cement.
mix it 2 bags sand 2 bags grano 1 cement and 1/2L pva
spread out on floor with steel float feather out edges with wetish mix. let set for 2hrs then remove any trowel/float marks.
it drys rock hard.
jobs a good en.
clean tools
swanny
-
cheers guys. off to order mannual for it today.
swanny
-
my 78 3.5 auto. she takes ages to change up gear unless you give it some welly. is this normal as i have not driven a automatic before. if not any ideas ??.
thanks swanny
-
i am hopefully going down to marshall neil. trying to get there friday night if thats ok.
swanny
-
i had similair thing with mine but was leacking inbetween were the nut joins the cooler and were the fins start. as temp measure i cut some rad hose to about 3/4in 18mm wide then jublie cliped it up. lasted a couple of weeks. i could not find a good 2nd hand one so useing a ford scorpion cooler with pipes made up by plant fitter.
its working a treet fingers crossed,touch woood.
-
give him my best too
what time are you thinking of setting of saley might come down for the laugh. did some one mention breckfast
-
i've slept (and had a drink) since then what stickers swanny
stanner stair lifts sponsor stickers
-
good luck ned dont take no doda from saley.
saley have you got those stickers sorted we were talking about in wales 
-
put the gloves away. thought it was a freindly sight.
swanny
-
thanks. going to start repairing the inner wings on tuesday i hope that will stop some of the water spraying every were
-
thanks i have heared of megasquirt system be for. read some where they drilled hole in dizzy top then fitted pipe to it connected to a pump so it presurerised it to stop water from entring.
would it help if i did away with the standard fan and put an eletric fan in its place so i could turn it on & off when entring water ?.
-
forgive me for been thick been in pub allready. but what is EDIS ??
swanny
-
thanks for the info guys best thing about the £180.00 rangie is the snorkel lol
swanny
-
hello whats the cheapest and simplest way to water proof my 78 v8 rrc put new leads on new dizzy cap going to put new coil in tupperware box in engine bay or could i move it inside if so what will i need.
thanks
swanny
Rivnut tools
in Tools and Fabrication
Posted
http://www.x-eng.co.uk/rivnut.asp hope this helps
swanny