[fitting 35 inch tires to a 110 tdi defender]

i will be doing offroad driving .

kam diffs have a 4.7 rear for salisbury but a 4.75 for the front,and they say its ok,but i would not be happy with that setup.

i think it will be down to 4.11s with the standard defender transfer box.

i know that the low range is all the same by the lt230 transferbox.

where else could a person look for diferent diff ratios?

earl

[fitting 35 inch tires to a 110 tdi defender]

hi, who has done this before, and what do i have to change?

i was thinking of fitting halfshafts and cv joints from kam, and changing the diff to 4.11 with the standard defender transferbox,or using the 4,7 diff ratio with 1,2 or 1,0 transferbox. what would work better?

what about the ratio difference of 4,75 on the front diff and 4,70 on the rear diff? how would that afect road driving?

earl

[110 SIIb FC on a defender chassis?]

I've got a spare straight six you could put in it

I can see why you'd want it as a daily drive though, I've onlky driven my S3FC a little bit but would love to go to the shops in it and tootle around town Something about the high driving position I think...They are supposed to be remarkebly good off-road as well but I'll never be trying that.

Power steering would have to be a priority though. I'd be interested to know how you get on with a 300tdi auto. I guess anything is possible.

i think it is just a pity to restore it and than just hide it in a garage, and any way when a person gets older it becomes mor difficult getting in to a forwarcontrol.Even with the midle diff unlocked i ifnd the defender more capable off road than the FC in 4wd.

i am going to be deciding the next couple of days what i want to do with it.

thanks for your offer for the straight six, but i am more in to diesels. (because i do about 40 000 km a year)

[110 SIIb FC on a defender chassis?]

OK with ENV's i can understand you want to swop for something more available but remember ENV's are stronger than any other factory LR axle. they're closer to truck axles IIRC made by eaton

you can fit RR/110/130 axles to get discs with a bit of butchery on axles and chassis and little more work to do 300 and auto box I can give you some pointers(my bates is 200/LT77/RR/RR & power steering) but why? its a good looking rosenbaum? and if the chassis is good count yourself very lucky

It really would be a shame to spoil it.

do you have some pictures?

[110 SIIb FC on a defender chassis?]

so i finaly got down to do some work on my FC, got the engine running (after standing still for about 9 years), took the camperbox off,and made a test drive.

the stiff suspension , the lack of a power steering and hard clutch makes a defender feel like a luxery car.

the chassis is rust free,so now i have to decide what i am going to do.

am still thinking of a 300tdi auto conversion, power steering,and more comfortable springs and than using it as a DD.

[110 SIIb FC on a defender chassis?]

picked it up on the weekend,but could not get it home (the 3 ton trailer could not cope with the load so i had to leave it by a friend)

maybe i will leave it as it is and use my defender as a DD, but i would still like a FC with coils ,TDI and automatic.

i will just get it running for the meantime and see.

[110 SIIb FC on a defender chassis?]

it does have ENV axles.

[110 SIIb FC on a defender chassis?]

@ PH, any pictures? or where can i contact your mate?

regards

earl

[110 SIIb FC on a defender chassis?]

i actually have all the parts i need,i have been collecting for the last 3 years, but a point to consider is the 100ds of hours of work.

[110 SIIb FC on a defender chassis?]

i would use a salsbury in the rear, and the 130 def. has a GVM of 3500 kg, so as far as that is concerned, that should work out.

[110 SIIb FC on a defender chassis?]

i just looked up the link you sent , but that is a 101 forwardcontrol, and i am talking about a 110 FC , which used the series chassis

[110 SIIb FC on a defender chassis?]

hi, the chassis is in perfect condition, but it is because of ride comfort, than fitting in the complete drivetrain. wheelbase is actually the same.

i have a 1998 defender, a 1995 discovery and a 1988 RRC chassis, and ecept for wheelbase , the curves look the same.

[110 SIIb FC on a defender chassis?]

just bought a forwardcontrol , an am wondering if anybody out there has put it on a defender chassis.

any infos would be welcome.

here are some pictures.

there is a 2,5 l peugot TD engine in it but i want to fit a 300 tdi engine with automatic gearbox, and because of spares availablity would also like to fit defender axles. that is why the question if anybody has done somthing similar.

earl

[Fitting Nissan Patrol GQ axles to a Discovery]

hi farmer,

your writeup seems so easy that i might do this to my 110 defender .

the only question is about the vibes,do you think that it might work on the 110 def.?

it is my daily driver(about 40000km/year.)

earl

[4.2 ltr landcruiser engine in def.]

just wanted to know if anybody has fitted the 4,2 ltr. engine into a defender?

does anyone have information?

thanks

earl

[defender 110 hcpu x-tra cab]

I like that, I've always liked the round back extra cabs the best. 'scusing ignorance here, but is that an original Hi-cap back end or did you have to modify it?

Steve

it is an original 130 double cab hi-cap back end. actually, except for the holders behind the cabin , no modifications are needed.the rear overhang is the same as by the 110 hi-cap

[defender 110 hcpu x-tra cab]

how much extra legroom/space have you gained? just out of interest

it all depends on how you mount your seat, but is is much more comfortable than before

the cabin has been lenghtend by 30 cm.

[defender 110 hcpu x-tra cab]

Looks Great

Wonder what a 130 version would look like

this is a 130 def.

[defender 110 hcpu x-tra cab]

That looks really good any more pics of inside the extra cab?

these are the only inside pictures i have.

i used the truck roof, but as soon as i get a double cab roof ,i will shorten it .that way, i can use the linings.

the seats are fitted so that they can be taken out without using any tools. i wanted to keep the middle seat ,otherwise i could have fitted the seats more towards the middle.

[defender 110 hcpu x-tra cab]

very neat, unusual hardtop for the hi-cal body, looks good.

thanks

the hardtop is self made.

[defender 110 hcpu x-tra cab]

hi, here are some pictures of my defender . it took me about two weeks to do the conversion. i must say, it is much more comfortable in the cabin now.

most of the work is done, except for a few small things.