j999dpt
-
Posts
63 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by j999dpt
-
-
hello,
ive got a laminova cooler for my 90.
ive moved the rad to the back of the truck. im not sure how to connect the water pipes?
any help will be gratefully receved.
cheers dan
-
hello,
i have a 300 tdi commercial disco. i have seen on the LEZ website that it will be non compiant after october. as i work inside the LEZ its a problem. does anyone know if i could reclassify it as a passanger vechicle by putting a window in or a seat. i dont use the car for commercial use just the fact that i need it for private purposes.
any light on the subject would be gratefully recieved.
cheers dan
-
Yes 265/75 Muds do fit on a commercial (see pic below). I have good standard springs, a 1" lift using blocks under the springs, a camel cut on rear arch, and I had to trim a bit of plastic off the front bumper return. Wheels have standard offset. Using modulars or spacers would give issues without a bigger lift.
Ok cool I'll get some 1" lift spacers , but just to clear someting up what's a camel cut?
-
what size bfg muds can i get on a standard disco commercial? do 265/75 r16 fit?
im new to all this discovery stuff!
thanks in advance
dan
-
hello mate thanks for that i think that should do it although if you have a complete wiring diagram it would be really handy i'll pm my email address if thats ok.
cheers dan
-
cheers dave thats a good start,
to explain ive put a discovery auto box into my defender and i need to connect the reversing switch and sort out the inhibit switch. so i need to know what those connections do.
thanks dan
-
hello im after the above as i need to know the connections of the auto box inhibit/reverse switch.
thanks in advance
dan
-
hello, just wondering can the bearing in the front cover on a 300tdi be changed as mine is really rough. ive taken the pullry off but cant seem to remove the bearing. has anyone else had any luck?
thanks
Dan
-
can i ask what happened to cause that slight axle malfunction.
-
id say a 300tdi truck cab 90.
any mods you do keep the origianl bits so you can return it to standard when u come to sell it , then you can sell all the parts and probably get a good return.
spend around £4000
-
hello,
just a quick question how do you get the glass out of a truck cab rear window to replace the rubbers and runners.
also the same for series doors.
also if anyone has the part numbers for the seals and rubbers that would be grand!
cheers dan
-
mo - thanks have all td5's got this mine is a 54 plate 110.
cheers
-
hello ive just laid my hands on a webasto heater, i would like to know where to take the fuel pick up from.
iam concernered that the fuel pressure may be too high from the td5 fuel pump.
any info may be of use.
thanks in advance.
dan
-
not a drop in my part of Surrey (Epsom) yet
Not a drop here in Essex Hopefully we will get a nice dusting.
-
i would say that this car could be a kick ass xtc car with low weight high power and winches.
food for thought.
-
I am sorry to say I get very defensive when I see what I take to be the abuse of green lanes by people who either do not understand or do not care about the sensitive political situation surrounding them.
Chris
i completely agree, to see lanes shut just because lanes are torn to shreads by short sighted people is a shame.
whats more of a shame is that due to those types of people not looking after the lanes we are forced to have this conversation.
i agree with your 1st point completely but dont think TG meant any harm by there comments and maybe my reprentation of what was said was wrong.
anyway anyone fancy going fishing for a clio?
Dan
-
Perhaps I am being over-sensitive/misinterpreting.
Chris
yeah a bit.
-
oh dont start...
he could have meant winching when at local play days - he did say greenlaning AND offroading.
yeah dont think he meant dragging his diff pans along a green lane , i think he meant 'i like green laning' AND, 'driving to get stuck and then winching '.
anyway nice to know we have a famous following!
-
how intersting, watching top gear last night when guy ritchie comes on as a star in a resnably priced car and ......... apparently he likes greenlaning and 'a bit of winching'. with his money we could have a top class winch truck on our hands!
anyone else see it?
-
hello what grease should i use whilst re building my warn 9.5 xp cheers
dan
-
just fitted a set of the GP diff pans,
very impressed , its worth the money.
-
Thank you mr western ..... Legend
-
hello i need the part no / where to buy the section of capping / finishing strip that runs down the rear corners on the tub. the bit your stop tail lights screw through.
hope that clearer than mud,
cheers dan
-
sounds like fun..........im in
laminova water connections help please
in Defender Forum (1983 - 2016)
Posted
sorry after re reading i realise the post is pretty vague.
what i mean is, what hose do i break into to feed the cooler at what point? do i run it in parallel to the rad?
parallel to the pipe exiting the cold side of the rad?
heater pipes are not great as they are at the front and the cooler is easier to mount behind the cab.
thanks dan