bobzilla7 Posted February 23, 2008 Share Posted February 23, 2008 Can anyone tel me the correct order to connect the wires to the wiper motor are please? Part of the harness is missing. The wire colours are: Blue/Light green Green Red/Light green Black Brown/Light green I've attached a picture of the block on the motor to show the layout and have given them numbers. I'm pretty sure Black is the horizontal one at the top (1). My wipers have a slow speed, a fast speed, an intermittent speed and self park. Help would be much appreciated as I've blown to many fuses!!! Thanks Quote Link to comment Share on other sites More sharing options...
cipx2 Posted February 23, 2008 Share Posted February 23, 2008 Better not use the pin layout/numbering you posted in the picture. Use the numbers on the back of the connector. Colour code in diagram as per actual colours on the diagram. Quote Link to comment Share on other sites More sharing options...
bobzilla7 Posted February 24, 2008 Author Share Posted February 24, 2008 Better not use the pin layout/numbering you posted in the picture. Use the numbers on the back of the connector.Colour code in diagram as per actual colours on the diagram. Fantastic. Thanks. All up an running again. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.