Jump to content

dip beam and main beam not working both sides


Recommended Posts

here goes the full dashboard i have taken out to gain access to all the wires.

dip beam and main beam not working looked in the haynes manual page 13.15 (dip beam circuit) and i am thinking that the voltage transformer is at fault

the light switch is brand new side lights come on ok as does the fog light, the relay behind the dash is working ok as it clicks when i switch the lights on this is a small relay next to the big coloured one but i have no power to the fuses that go to headlights what so ever

has any body come across this before.......

or any body got any ideas ......

1987 90 defender with 200tdi fitted wiring loom is from the n/a engine

Link to comment
Share on other sites

Test light.

Headlights switched on.

One wire from test light to Blue wire from headlight switch. The other wire from test light to earth.

Does the test light work ?

If no the new switch is faulty.

If yes ...Proceed.

Headlight switych on.

Test light to Blue/Red (dip) wire at dip switch.

Does the test light light up.

If no, Dip switch is faulty.

If yes. Check the Blue/white the same way.

Does headlight flash work ?

There you go. That should occupy you for all of half an hour. Then answers please.

mike

Link to comment
Share on other sites

Test light.

Headlights switched on.

One wire from test light to Blue wire from headlight switch. The other wire from test light to earth.

Does the test light work ?

If no the new switch is faulty.

If yes ...Proceed.

Headlight switych on.

Test light to Blue/Red (dip) wire at dip switch.

Does the test light light up.

If no, Dip switch is faulty.

If yes. Check the Blue/white the same way.

Does headlight flash work ?

There you go. That should occupy you for all of half an hour. Then answers please.

mike

yes both wires are live when switched on and the headlight flash dont work either but the wire goes live....

also didn,t mention this previously but the oil light on dash is always on even if i disconnect it from the switch....

checked voltage coming from the blue and red wire out of that voltage transformer it reads 0.06

everything points to that in my book but i am useless when it comes to electrics

warren

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We use cookies to ensure you get the best experience. By using our website you agree to our Cookie Policy