Mark Posted February 5, 2009 Share Posted February 5, 2009 I need to make up some new brake pipes for the back axle of my discovery, amongst other places, but I don't know whether it should have imperial threaded fittings of metric. My suspicion is M10 fine, but I am not sure they are all that thread - I think the t-piece on top of the axle is different. Can anyone confirm if they are all metric, or if I need a mixture of fittings? Also, planning to use kunifer rather than steel pipe, but can someone confirm what size pipe is used as standard? Thanks Mark Quote Link to comment Share on other sites More sharing options...
disco_al Posted February 5, 2009 Share Posted February 5, 2009 i would imagine that the majority of fittings will be m10, the axle one could be m12. imperial fittings haven't been used for years (although being a landrover anythings possible) pipe should 3/16", standard size for most cars/light vans etc Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.