andro Posted June 24, 2009 Share Posted June 24, 2009 hi i got the 1.8 petrol 3 door replaced rear shoes fron discs and pads and handbrake cable...went to bleed the system filled the chamber up with fresh fluid ..pump n pump but nothing comes out of the nipple? blew out the pipe with compressed air and it shot out ...but when i re attached the line still it wont run out..any ideas? is there a system to bleeding the freelander? any views appreciated in advance alex Quote Link to comment Share on other sites More sharing options...
stuck Posted June 25, 2009 Share Posted June 25, 2009 hi i got the 1.8 petrol 3 door replaced rear shoes fron discs and pads and handbrake cable...went to bleed the system filled the chamber up with fresh fluid ..pump n pump but nothing comes out of the nipple? blew out the pipe with compressed air and it shot out ...but when i re attached the line still it wont run out..any ideas? is there a system to bleeding the freelander? any views appreciated in advance alex Get yourself a Gunson Easibleed, most bleed problems solved. Quote Link to comment Share on other sites More sharing options...
dann Posted June 28, 2009 Share Posted June 28, 2009 Before getting the 'eezibleed' which will do the job: try opening up all bleed nipples, top up reservoir and eventually the fluid will begin to dribble out of the bleed nipples (via gravity) don't press the brake at this point. once fluid has appeared tighten all nipples except furthest from reservoir and commence normal bleeding procedure i.e. pedal down- tighten nipple- pedal up- undo nipple etc etc. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.